By visiting this site, you accept the use of cookies. More about our cookie policy.

GOST 12492.3-90

GOST 12492.3−90 strip Profile with thickening of agricultural machinery. Assortment

GOST 12492.3−90

Group B22


INTERSTATE STANDARD

STRIP PROFILE WITH THICKENING
FOR AGRICULTURAL MACHINERY

Assortment

Agricultural machinery. Bulged strip section. Dimensions

OKP 09 4115

Date of introduction 1991−01−01


INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on management of quality and standards from 30.03.90 N 752

3. REPLACE GOST 12492.6−72

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

   
The designation of the reference document referenced
Item number
GOST 535−88
1

5. Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−95)

6. REISSUE


This standard applies to hot-rolled strip profile with thickening.

1. Shape, dimensions, limit deviations according to him, the cross-sectional area, weight of 1 m of the profile, reference values relative to the axes shall be as specified in the drawing and in the table.

ГОСТ 12492.3-90 Профиль полосовой с утолщением для сельскохозяйственных машин. Сортамент

         
Steel grade

The cross-sectional area, cmГОСТ 12492.3-90 Профиль полосовой с утолщением для сельскохозяйственных машин. Сортамент

Weight of 1 m of section, kg

The moment of inertia, cmГОСТ 12492.3-90 Профиль полосовой с утолщением для сельскохозяйственных машин. Сортамент

     

ГОСТ 12492.3-90 Профиль полосовой с утолщением для сельскохозяйственных машин. Сортамент

ГОСТ 12492.3-90 Профиль полосовой с утолщением для сельскохозяйственных машин. Сортамент

Ст6сп1 according to GOST 535
19,545
15,35
3,30
340,19

2. The curvature of the profile in the vertical and horizontal planes should not exceed 0.5% of the length. At the request of the consumer profiles are produced with a curvature of no more than 0.2% of the length.