GOST 19065-80
GOST 19065−80 cutting Inserts, replaceable carbide faceted irregular Pentagon shape with a hole and a chip breaking C-grooves on one side. The design and dimensions (with Amendments No. 1, 2)
GOST 19065−80
Group 56
INTERSTATE STANDARD
CUTTING INSERTS, REPLACEABLE CARBIDE FACETED
IRREGULAR PENTAGON SHAPE WITH A HOLE AND A CHIP BREAKING C —
GROOVES ON ONE SIDE
The design and dimensions
Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes
and chip-breaking flutes on one face only. Design and dimensions
ISS 25.100
77.160
OKP 19 6000
Date of introduction 1982−01−01
INFORMATION DATA
1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR
2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from
3. REPLACE GOST 19065−73
4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS
| The designation of the reference document referenced |
Item number |
| GOST 19042−80 | 4 |
| GOST 19086−80 | 5 |
5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from
6. EDITION with Amendments No. 1, 2 approved in October 1984, December 1990 (IUS 2−85, 4−91)
The requirements of this standard are mandatory.
(Added, Rev. N 2).
1. The design and dimensions of plates shall be as specified in the drawing and in the table.
__________________
* Size for reference.
mm
| The marking plates of classes of tolerances |
|||||||||||
| U |
M | ||||||||||
| digital | alpha digital |
When- me- believe it- the cost |
digital | alpha digital |
When- me- believe it- the cost |
||||||
| 10114−110408 | PNUM-110408 |
10124−110408 | PNMM-110408 | 11,5 | 15,875 | 4,76 | 6.35 mm | 0,8 | 17,562 | ||
| 10114−110416 | PNUM-110416 | 10124−110416 | PNMM-110416 | 1,6 | 17,375 | ||||||
| 10114−130412 | PNUM-130412 |
10124−130412 | PNMM-130412 | 13,8 | 19,030 | Of 7.93 | 1,2 | 21,019 | |||
| 10114−130420 | PNUM-130420 | 10124−130420 | PNMM-130420 | 2,0 | 20,832 | ||||||
| 10114−130612 | PNUM-130612 |
10124−130612 | PNMM-130612 | 13,8 | 19,050 | 6.35 mm | 1,2 | 21,019 | |||
| 10114−130620 | PNUM-130620 | 10124−130620 | PNMM-130620 | 2,0 | 20,832 | ||||||
| 10114−160612 | PNUM-160612 |
10124−160612 | PNMM-160612 | 16,1 | 22,200 | 1,2 | 24,541 | ||||
Example of designation when ordering plates of hard alloy VK6 brand, class of admission U, with cutting edge length =11.5 mm, thickness
=4.76 mm, radius
=0,8 mm:
19 6524
0391 110408
2. The shape and dimensions of a chip breaking C-grooves are provided in Annex 1.
3. Approximate weight plates are given in Appendix 2.
4. The notation of plates according to GOST 19042.
5. Technical requirements — GOST 19086.
6. Applied alloys is given in Appendix 3.
(Added, Rev. N 2).
ANNEX 1
Recommended
The shape and dimensions of a chip breaking C-grooves on the front surfaces of the plates.
mm
| 15,875 |
3,6 | 1,0 |
| 19,050 |
4,0 | 1,6 |
| 22,200 |
4,5 | 1,6 |
APPENDIX 1. (Changed edition, Rev. N 1).
ANNEX 2 (informative). Approximate weight plates
ANNEX 2
Reference
| Approximate weight of plates, g | |||||||||
| Digital signage plates | carbide grades | from butwal- framework alloy grade |
hard alloy coated | ||||||
| VK6 | VK8 | Т5К10 | Т14К8 | T15K6 | КНТ16 |
ВП1255 | ВП3115 | ВП3225 | |
| 10114−110408 |
13,0 | 12,8 | 11,2 | 10,2 | 10,00 | 5,05 | 11,90 | 13,0 | 12,8 |
| 10124−110408 |
|||||||||
| 10114−110416 |
12,9 | 12,8 | 11,2 | The 10.1 | Of 9.96 | 5,05 | 11,90 | 12,9 | 12,8 |
| 10124−110416 |
|||||||||
| 10114−130412 |
18,3 | 18,1 | 15,9 | 14.4 V | 14,10 | Of 7.14 | Of 16.83 | 18,3 | 18,1 |
| 10124−130412 |
|||||||||
| 10114−130420 |
18,2 | 18,0 | 15,8 | 14,3 | 14,10 | 7,10 | 16,82 | 18,2 | 18,0 |
| 10124−130420 |
|||||||||
| 10114−130612 |
24,9 | 24,6 | 21,5 | 19,5 | 19,20 | Of 9.72 | Of 22.87 | 24,9 | 24,6 |
| 10124−130612 |
|||||||||
| 10114−130620 |
24,8 | 24,5 | 21,4 | 19,4 | 19,10 | 9,69 | 22,86 | 24,8 | 24,5 |
| 10124−130620 |
|||||||||
| 10114−160612 |
35,3 | 34,8 | 30,5 | 27,7 | 27,20 | 13,79 | 32,36 | 35,3 | 34,8 |
| 10124−160612 |
|||||||||
APPENDIX 2. (Changed edition, Rev. N 2).
APPENDIX 3 (recommended). Applied grades of plates
APPENDIX 3
Recommended
| Digital signage plates |
The main application | The additional use of | Application by special order |
| 10114−110408 | N 4, N 5, N 7, N 11 |
N 3, N 6 | N 8, N 9, N 10 |
| 10124−110408 | N 4, N 5, N 7 | N 3, N 6, N 10 | N 8, N 9, N 11 |
| 10114−110416 | N 4, N 5, N 7, N 8, N 11 |
N 3, N 6, N 9 | N 10 |
| 10124−110416 | N 5, N 7 | - | N 3, N 4, N 6, N 8, N 9, N 10, N 11 |
| 10114−130412 | N 4, N 5, N 7, N 11 |
N 9, N 10 | N 3, N 6, N 8 |
| 10124−130412 | N 5, N 7 | - | N 3, N 4, N 6, N 8, N 9, N 10, N 11 |
| 10114−130420 | N 4, N 5, N 7 | N 3, N 6, N 8, N 9, N 10, N 11 | |
| 10124−130420 | - | - | N 3, N 4, N 5, N 6, N 7, N 8, N 9, N 10, N 11 |
| 10114−130612 | N 4, N 5, N 7, N 11 | N 3, N 6, N 9, N 10 | N 8 |
| 10124−130612 | N 4, N 5, N 7 | - | N 3, N 6, N 8, N 9, N 10, N 11 |
| 10114−130620 | N 4, N 5, N 7 | N 3 | N 6, N 8, N 9, N 10, N 11 |
| 10124−130620 | - | - | N 3, N 4, N 5, N 6, N 7, N 8, N 9, N 10, N 11 |
| 10114−160612 | N 4, N 5, N 7 | N 6, N 9, N 10, N 11 | N 3, N 8 |
| 10124−160612 | N 5, N 7 | N 10 | N 3, N 4, N 6, N 8, N 9, N 11 |
N 3 — VK6; N 4 — VK8; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6; N 8 — ТН20; N 9 — ВП3115; N 10 — ВП3325; N 11 — ВП1255.
APPENDIX 3. (Added, Rev. N 2).
