By visiting this site, you accept the use of cookies. More about our cookie policy.

GOST 3091-80

GOST R ISO 22034-1-2013 GOST R ISO 22034-2-2013 GOST P 53772-2010 GOST 5468-88 GOST 1579-93 GOST 10447-93 GOST 3187-76 GOST 9870-61 GOST 4034-63 GOST 4032-63 GOST 4028-63 GOST 792-67 GOST 16135-70 GOST 3920-70 GOST 9850-72 GOST 7675-73 GOST 18901-73 GOST 3062-80 GOST 3093-80 GOST 1526-81 GOST 2771-81 GOST 3875-83 GOST 3071-88 GOST R 50575-93 GOST P 50708-94 GOST 4033-63 GOST 13840-68 GOST 15598-70 GOST 3090-73 GOST 3110-74 GOST 3339-74 GOST 3120-75 GOST 283-75 GOST 10505-76 GOST 14963-78 GOST 14081-78 GOST 7372-79 GOST 5663-79 GOST 1545-80 GOST 3092-80 GOST 9161-85 GOST 29121-91 GOST 18143-72 GOST 1668-73 GOST 7480-73 GOST 7676-73 GOST 3193-2015 GOST 2715-75 GOST 10506-76 GOST 7669-80 GOST 2333-80 GOST 7668-80 GOST 3069-80 GOST 7667-80 GOST 2688-80 GOST 3089-80 GOST 3081-80 GOST 6727-80 GOST 3083-80 GOST 3091-80 GOST 7665-80 GOST 3077-80 GOST 2387-80 GOST 3064-80 GOST 3063-80 GOST 7348-81 GOST 5437-85 GOST 14118-85 GOST 23279-2012 GOST 14311-85 GOST 9074-85 GOST 3068-88 GOST 13603-89 GOST P 50566-93 GOST 4030-63 GOST 4035-63 GOST 4029-63 GOST 15892-70 GOST 11850-72 GOST 18899-73 GOST 6750-75 GOST 3088-80 GOST 10446-80 GOST 14954-80 GOST 7681-80 GOST 3079-80 GOST 3066-80 GOST 3097-80 GOST 3085-80 GOST 8478-81 GOST 4727-83 GOST 18834-83 GOST 26366-84 GOST 9124-85 GOST 3067-88 GOST 3070-88 GOST 3306-88 GOST 8803-89 GOST 17305-91 GOST P 50567-93 GOST 9389-75 GOST 2172-80 GOST 1071-81 GOST 3826-82 GOST 16853-88 GOST 12766.1-90 GOST 3241-91 GOST 16828-81 GOST 285-69 GOST 6613-86 GOST 28334-89 GOST 16827-81 GOST 5336-80 GOST 3282-74

GOST 3091−80 rope flat design 8х4х7 (1+6). Assortment (with Amendments No. 1, 2)

GOST 3091−80

The Group Of 75

INTERSTATE STANDARD
ROPE FLAT DESIGN 8х4х7 (1+6)
Assortment

Flat rope construction 8х4х7 (1+6). Dimensions

ISS 77.140.65

OKP 12 5100, 12 5200

Date of introduction 1982−01−01

Resolution of the USSR State Committee for standards of 23 April 1980 N 1834 date of introduction is established 01.01.82

The expiration time limit is removed by the Resolution of Gosstandart from 22.11.91 N 1752

REPLACE GOST 3091−69

Edition (may 2011) with Amendments No. 1, 2 approved in November 1986, November 1992 (IUS 2−87, 2−92

1. This standard applies to flat steel ropes.

ГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)

2. The ropes are classified by signs

for the purpose:

gruzolyudskie — GL,

freight — G;

mechanical properties grades: VC, V, 1;

by coating the surface of wire rope:

from wire without coating,

galvanized wire depending on the surface density of zinc: C, W, coolant;

by way of lay:

prosrochena — N;

for precision manufacturing:

normal

high — T;

according to the degree of balance:

ratowanie — R,

neritani.

Examples of symbols


Flat rope with a width of 83 mm, gruzopodemnogo destination from wire without coating, of the brand, prescripcialis, Neradovsky, high precision, marking groups 1370 N/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)(140 kgf/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)):

The rope 83-GL-V-N-T-1370 GOST 3091−80


The same, a width of 107 mm, cargo destination, marks I, galvanized by the group W, prescripcialis, Neradovsky, high precision, marking groups 1570 N/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)(160 kgf/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)):

Rope 107-G-I-W-N-T-1570 GOST 3091−80

3. The size of ropes and basic parameters shall be as specified in the table.


Note. The ropes, breaking strength of which is given to the left of the bold line are made of wire without coating and galvanized. Ropes of galvanized wire groups W coolant and a width of 119 mm marking groups 1570 N/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)(160 kgf/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)) and 1670 N/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)(170 kgf/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)), 83−119 mm marking group 1770 N/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)(180 kgf/mmГОСТ 3091-80 Канат плоской конструкции 8х4х7(1+6). Сортамент (с Изменениями N 1, 2)) are made by agreement between manufacturer and consumer.

The ropes, breaking strength of which is given to the right of the bold line are made of wire without coating. Allowed in coordination with the consumer manufacturing of ropes, galvanized wire.

2, 3. (Changed edition, Rev. N 1, 2).

4. Technical requirements, acceptance rules, test methods, packaging, marking, transportation and storage GOST 3241−91.


The electronic text of the document
prepared by JSC «Code» and checked by:
the official publication of the
Steel ropes. Assortment: Sat.Standards. -
M.: STANDARTINFORM, 2011