GOST R 51704-2001

• gost-r-51704-2001.pdf (261.54 KiB)
  ГОСТ Р 51704-2001

GOST R 51704−2001 platinum Bullion dimensional. Specifications

GOST R 51704−2001

Group B50

STATE STANDARD OF THE RUSSIAN FEDERATION

PLATINUM BULLION DIMENSIONAL

Specifications

Platinum weighted ingots. Specifications

OKS 77.140.90*
GST 17 5120
_________________________________
* In the index «National standards», 2008

OKS 11.060, 39.060 — note the manufacturer’s database.

Date of introduction 2001−07−01

Preface

1 DEVELOPED AND SUBMITTED by the Technical Committee on standardization TC 304 «Noble metals, alloys, industrial and jewelry products made of them; secondary resources containing noble metals», Ekaterinburg factory on processing of nonferrous metals

2 ADOPTED AND put INTO EFFECT by the Resolution of Gosstandart of Russia from January 17, 2001 N 20-St

3 INTRODUCED FOR THE FIRST TIME

1 Scope

This standard applies to small bars of platinum (hereinafter — the blocks) with weight from 5 to 500 g, are designed for commercial and other purposes.

2 Normative references

The present standard features references to the following standards:

GOST 8273−75 wrapping Paper. Specifications

GOST 9347−74 Cardboard gasket and gasket from him. Specifications

GOST 10354−82 polyethylene Film. Specifications

GOST 12226−80* Platinum. Methods of analysis
________________
* On the territory of the Russian Federation recommended to use the 52518−2006 GOST R, GOST R 52519−2006, 52520−2006 GOST R and GOST R 52521−2006, here and hereafter. — Note the manufacturer’s database.

GOST 12341−81* Platinum bullion. Specifications
________________
* On the territory of the Russian Federation GOST 31290−2005, here and hereafter. — Note the manufacturer’s database.

GOST 14192−96 Marking of cargo

GOST 24104−88* laboratory Scales General purpose and model. General specifications
________________
* On the territory of the Russian Federation GOST 24104−2001, here and hereafter. — Note the manufacturer’s database.

3 Symbols and abbreviations

In standard, the following symbols and abbreviations:

999,5 PL: PL — platinum; 999,5 sample, i.e., the minimum noble metal content measured in parts per thousand mass units (ppm, %);

UWB 250 With bar, sh — forged performance, P — platinum, number — nominal value of the mass of the ingot in grams.

Example of symbolic designation of platinum bullion brand PL 999,8 weighing 10 grams, in building performance:

Ingot PL 999,8 UWB 10 GOST R 51704−2001

4 Technical requirements

The ingots shall conform to the requirements of this standard. The ingots are put in a stamped design.

4.1 Key parameters and dimensions

4.1.1 Dimensions and annotations bars are given in table 1.


Table 1 — Designation, dimensions and weight of bullion, platinum

4.1.2 Form of ingots shall conform to appendices A and B.

4.2 Characteristics (properties)

4.2.1 Chemical composition of platinum bullion shall be those specified in table 2.


Table 2 — Chemical composition of platinum ingot in a graduated

4.2.2 the surface of the ingot must be free of grease, captivity, cracks, cavities, delamination, burrs and foreign particles. The flip side of the ingot can be made frosted.

4.2.3 Weight and ingots limit deviations from it shall conform to table 1.

4.3 Marking

4.3.1 the Marking is applied on the front side of each ingot and shall contain:

the inscription «RUSSIA» located in the oval;

— the nominal mass of ingot, g;

— description of metal — «platinum»;

— mass fraction of platinum in the samples;

— trademark of the manufacturer;

number (code) of the ingot.

4.3.2 the Order of the markings on the ingot is given in Appendix A.

Notes

1 by agreement with the manufacturer details on the front side of the ingot can be performed in English in Appendix B. In the ingots with a mass of 100 g and less than the inscription «MELTER ASSAYER» in agreement with the customer is allowed to apply.

2 On the front or back side of the ingot may be caused to the trademark of the customer or other symbols, as agreed upon with the manufacturer.

4.3.3 Marking of the ingot shall be clear, legible. Not allowed corrections labeling, merge letters and numbers. Impression marking of the text on the ingot must be convex.

The number of the ingot is set by the manufacturer and is done with a metal stamp. He, like other marking (Annex A and B), may be applied to a laser or other method.

Note — By agreement number ingot weight of 100 g and less can be printed on the reverse side.

4.4 Packing

4.4.1 Each ingot Packed in the package of polyethylene film according to GOST 10354. The bars should be stacked in rows in a wooden box, manufactured according to the normative document. Each number must be separated from the next paper according to GOST 8273 and cardboard according to GOST 9347. The boxes are Packed in a metal container.

It is allowed to deliver the boxes without package in the container. In this case, the wall thickness of the box shall not be less than 10 mm.

Allowed the use of other packaging materials and types of packaging that protects bars from damage.

4.4.2 Each ingot is accompanied by a manufacturer’s certificate in Appendix B.

In agreement with the manufacturer in the certificate may be made to the trademark and the name of the customer.

4.4.3 Each delivery bullion must be accompanied by a specification, protected by plastic film, which is placed in one of the packing boxes.

In specifications should be specified:

— the name of the manufacturer;

room specifications;

— name of the product: «platinum bullion dimensional»;

— the designation of this standard;

— the name of the recipient;

— batch numbers;

— the numbers of places;

— number of ingots;

— marking of ingots;

nominal bar weight, g;

— mass fraction of platinum, %;

— number of bars for parties.;

— the year of issue;

— signatures of responsible persons.

4.4.4 Each batch of ingots is accompanied by a document about quality (passport), which must be specified:

— the name of the manufacturer;

— name of the product: «platinum bullion dimensional»;

— the designation of the ingot;

— the designation of this standard;

— the batch number;

— number of ingots;

— mass fraction of platinum and impurities, %;

— the number of ingots making up the consignment.;

— the mass of the party bars, g;

room specifications;

— date of issue;

— stamp (seal) of the technical control of manufacturer;

— signatures of responsible persons.

The document about quality in plastic film put in the box along with ingots of the respective party.

Allowed to form a package of documents (specification, quality) and send it separately.

Note — by agreement with the manufacturer of each ingot may be accompanied by a statement from the passport, containing: manufacturer’s name, product name, designation of the ingot, the designation of the present standard, the number of ingot, the batch number that the ingot; mass fraction of platinum and impurities (%) the weight of the ingot, the specification number, issue date, stamp (stamp) and signature of the responsible person.

4.4.5 On each drawer and label or put a stamp indicating the number of specifications and numbers. Labeling boxes is carried out according to GOST 14192 with the indication of manipulation sign «Fragile. Caution."

4.4.6 Each container, the box should be sealed or sealed by the manufacturer.

5 acceptance Rules

5.1 the Ingots are presented to the receiving parties. The weight of the batch shall not exceed 100 kg. the Party shall consist of ingots of one heat.

5.2 determination of the chemical composition of platinum from the manufacturer is carried out on samples taken from each heat by the method of the manufacturer.

The manufacturer guarantees that the content of platinum in the ingot according to the requirements of 4.2.1.

5.3 If necessary, determination of the chemical composition of ingots from the customer can be performed on the samples taken from any two bars of the party (bottoms) by drilling in the opposite corners and sides of the ingot to a depth equal to half the thickness of the ingot.

For bars less than 3 mm thick breakdown may be the ingot or part of it.

5.4 Checking the quality of the surface (4.2.2), mass (4.2.3) and labelling (4.3) subjected to every ingot.

5.5 checking the quality of the packing (4.4), including documentation, are subjected to 100% of the supplied batch of ingots.

5.6 Upon receipt of unsatisfactory results of analysis of the chemical composition (4.2.1) a second check for twice the number of samples taken from the same batch. The results of the repeated checking are final and apply to the entire party.

5.7 in the event of disagreement in the evaluation of the chemical composition of platinum between the manufacturer and the customer to carry out the arbitration the analysis of the sample, which is taken in the manner prescribed in 5.2. Arbitrary sample kept at the factory for at least three months from the date of shipment.

6 Methods to control

6.1 analysis of the chemical composition of platinum is carried out according to GOST 12226 or another means certified in the prescribed manner and providing the requirements of this standard.

6.2 control the mass of ingots up to 200 g, inclusive, is carried out on the scales General purpose of the 2nd accuracy class, over 200 bars to 500 g inclusive on the scales General purpose of the 3rd accuracy class according to GOST 24104.

6.3 Control of the surface quality, marking, and packaging ingots is carried out without the use of magnifying devices.

7 Transportation and storage

7.1 Transportation and storage of ingots of platinum is carried out in accordance with the instructions [1].

Annex a (mandatory). The order of labeling of a small bar of platinum

APPENDIX A
(required)

1 — the number (code) of the ingot; 2 — trademark of the manufacturer; 3 — the mass fraction of platinum in the samples; 4 — nominal weight of the ingot

APPENDIX B (mandatory). The order of labeling of a small bar of platinum on the English language

APPENDIX B
(required)

1 — the number (code) of the ingot; 2 — trademark of the manufacturer; 3 — the mass fraction of platinum in the samples; 4 — nominal weight of the ingot

ANNEX b (mandatory). The contents of the certificate of the ingot

THE APP
(required)

RUSSIAN FEDERATION

CERTIFICATE
a small bar of platinum N _________

GOST R 51704−2001

APPENDIX d (reference). Bibliography

APPENDIX D
(reference)

________________
* On the territory of the Russian Federation the instruction about an order of accounting and storage of precious metals, precious stones, products from them and reporting in their manufacture, use and handle from 29.08.2001 N 68н, here and hereafter. — Note the manufacturer’s database.