By visiting this site, you accept the use of cookies. More about our cookie policy.

Aluminium AD (1015)

Designation

Name The value
Designation GOST Cyrillic АД
Designation GOST Latin AD
Transliteration AD
The chemical elements -
Name The value
Designation GOST Cyrillic 1015
Designation GOST Latin 1015
Transliteration 1015
The chemical elements 1015

Description

Aluminium AD applies: for the manufacture of semi-finished products (drawn wire, sheets, tapes, strips, plates, profiles, panels, rods, pipes, forgings and stampings) by hot or cold deformation, as well as ingots and slabs; heat exchangers evaporators and condensers with two-sided bulge of the channel used in domestic refrigerators and freezers; roll foil used for thermal, hydro and sound insulation; cold-rolled foil intended for packaging of food, drugs, medical devices, cosmetic products industry, and also for the production of packaging materials based on it; part clad with copper on one side (APM-1) and intended for various products in the electrical industry.

Note

ISO 209−1 aluminium brand AD has a designation А199,0 and 1200.

Standards

Name Code Standards
Tapes В54 GOST 13726-97, OST 1-92006-79
Pipes from non-ferrous metals and alloys В64 GOST 18482-79, TU 1-5-185-76
Bars В55 GOST 21488-97
Non-ferrous metals, including rare metals, and their alloys В51 GOST 4784-97, OST 1 92014-90
Sheets and stripes В53 GOST 618-73, GOST 17232-99, GOST 21631-76, GOST 25001-81, GOST 745-2003, OST 4-021.048-78, OST 1-92045-75, TU 1-9-548-87
Sectional and shaped rolling В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92, OST 1 92093-83, OST 1 92069-77
Wire of non-ferrous metals and their alloys В74 OST 1 92005-2002

Chemical composition

Standard Mn Cu Al Ti Zn
GOST 4784-97 ≤0.05 ≤0.05 ≥99 ≤0.05 ≤0.1
Al is the base.
According to GOST 4784-97, the total mass fraction of silicon + iron ≤ 1.00%, the mass fraction of other impurities ≤ 0.05% each, the total mass fraction of other impurities ≤ 0.15%, the total mass fraction of all impurities ≤ 1.0%.

Mechanical characteristics

Section, mm σB, MPa d5, % d
The tape is able to supply for OST 1-92006-79
5-10.5 ≥68.6 - ≥15
0.25-0.5 ≥58.8 - ≥20
0.5-0.9 ≥58.8 - ≥25
0.9-10.5 ≥58.8 - ≥28
0.25-0.8 ≥147.7 - ≥3
0.8-3.5 ≥147.7 - ≥4
3.5-4 ≥147.4 - ≥5
Sheet metal in delivery condition according to GOST 21631-76, OST 4.021.047-92 tape according to GOST 13726-97 (samples transverse)
5-10.5 ≥70 - ≥15
0.3-0.5 ≥60 - ≥20
0.5-0.9 ≥60 - ≥25
0.9-10.5 ≥60 - ≥30
0.3-0.8 ≥145 - ≥3
0.8-3.5 ≥145 - ≥4
3.5-10.5 ≥130 - ≥5
0.8-4.5 ≥100 - ≥6
Plates according to GOST 17232-99. 4.021.061-92 supplied without heat treatment (samples transverse)
11-25 ≥78 ≥18 -
25-80 ≥64 ≥15 -
The wire drawn according to OST 1 92005-2002
≤12 - ≥20 -
Extruded normal strength according to GOST 8617-81 on delivery
≥59 ≥20 -
The pressed bars normal strength in the delivery condition according to GOST 21488-97 (longitudinal samples)
8-300 ≥60 ≥25 -
Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
≥60 ≥20 -

Description mechanical marks

Name Description
Section Section
σB Limit short-term strength
d5 Elongation after rupture
d Elongation after rupture

Our consultant will save your time

+49 (170) 650 7006
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)