By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy VD1

Alloy 01311C Alloy 1105 Alloy 1151 Alloy 1161 Alloy 1163 Alloy 1201 Alloy 1205 Alloy 1213 Alloy 1215 Alloy 1320 Alloy 1370 Alloy 1420 (01420) Alloy 1424 Alloy 1430 Alloy 1440 Alloy 1441 Alloy 1450 Alloy 1531 Alloy 1541 Alloy 1541pc Alloy 1543 Alloy 1577 Alloy 1905 Alloy 1911 Alloy 1915 Alloy 1925 Alloy 1931 Alloy 1933 Alloy 1935 Alloy 1953 Alloy 1955 Alloy 1973 Alloy 1980 (B48-4) Alloy 1985h Alloy 8011 Alloy 8011A Alloy 8111 Alloy A1Mg1M1 Alloy ABT101 (1901) Alloy ABT102 (1903) Alloy AB (1340) Alloy AVD1 Alloy AVD1-1 ABE Alloy Alloy AD1pl Alloy AD31 (1310) Alloy AD31E (1310E) Alloy AD33 (1330) Alloy AD35 (1350) Alloy AW Alloy AZh0.6 Alloy AZh0.8 Alloy AZh1 Alloy AK10 (SvAK10) AK12D alloy Alloy AK4 (1140) Alloy AK4-1 (1141) Alloy AK4-2 (1143) Alloy AK5 Alloy AK6 (1360) Alloy AK6-1 Alloy AK8 (1380) AKM Alloy Alloy AKCM Alloy AM4 Alloy AMg0.5 (1505) Alloy AMg0,5pc Alloy AMg0.7 Alloy AMG1 (1510) Alloy AMg1.5 Alloy AMg2 (1520) Alloy AMg2.5 Alloy AMg3 (1530) Alloy AMg3.5 Alloy AMg3S Alloy AMg4 (1540) Alloy AMg4.5 Alloy AMg5 (1550) Alloy AMg5P (1557) Alloy AMg6 (1560) Alloy AMg61 (1561) Alloy AMg61H (1561H) Alloy AMg63 (СвАМг63) Alloy AMg65 Alloy AMSH1 Alloy AMSH2 Alloy AMZ (1400) Alloy AMTS (1401) Alloy AMSh1 (AMSh-1) Alloy APBA-1 (1551) Alloy ACpl Alloy B-1341 Alloy B-1461 Alloy B-1469 Alloy B-1963 Alloy B48P Alloy B65 (1165) Alloy B91 (1913) Alloy B92 (1920) Alloy B93 (B93pch; 1930) Alloy B94 (1940) Alloy B95 (1950) Alloy B95-1 Alloy B95-2 Alloy B95och Alloy B95P (1957) Alloy B95pch Alloy B96C (1960) Alloy B96C1 Alloy B96C3 (1965-1) Alloy VD1 Alloy VD17 (1170) Alloy D1 (1110) Alloy D12 (1521) Alloy D16 (1160) Alloy D16P (1167) Alloy D18 (1180) Alloy D19 (1190) Alloy D19P (1197) Alloy D19h Alloy D1P (1117) Alloy D20 (1200) Alloy D21 (1210) Alloy D23 (WAD23; 1230) Alloy D24 (VAD1; 1191) Alloy K48-1 Alloy K48-2 (1941) Alloy K48-2pch (1943) Alloy K48P Alloy M40 Alloy MM (1403) Alloy SAB1 Alloy SAW2 Alloy SAB6 Alloy SAB9 Alloy SIL 1C Alloy SIL 2S

Designation

Name The value
Designation GOST Cyrillic ВД1
Designation GOST Latin BD1
Transliteration VD1
The chemical elements ВД1

Description

Alloy VD1 is used: for the manufacture of ingots, pressure treated, and podrihtovali in the manufacture of aluminum alloys.

Standards

Name Code Standards
Secondary non-ferrous metals, alloys and wastes В57 GOST 1131-76
Pipes from non-ferrous metals and alloys В64 GOST 18482-79, GOST 23697-79, TU 1-804-142-90
Bars В55 GOST 21488-97, OST 1 92010-71, OST 1 92012-71
Sheets and stripes В53 GOST 21631-76, OST 1 92009-71, TU 1-2-482-86, TU 1-804-473-2009
Sectional and shaped rolling В52 GOST 8617-81, GOST 13616-97, GOST 13617-97, GOST 13618-97, GOST 13619-97, GOST 13620-90, GOST 13621-90, GOST 13622-91, GOST 13623-90, GOST 13624-90, GOST 13737-90, GOST 13738-91, GOST 17575-90, GOST 17576-97, GOST 29296-92, GOST 29303-92, GOST Р 50066-92, GOST Р 50067-92, GOST Р 50077-92

Chemical composition

Standard Mn Si Ni Fe Cu Al Zn Mg
TU 1-804-473-2009 0.3-0.8 ≤1 ≤0.2 ≤1 2-5 The rest ≤0.7 0.4-1.6
Al is the base.
According to GOST 1131-76, the total content of Ti + Cr + Zr≤0.2%. The content of other impurities (individually) is ≤ 0.05%. The total content of other impurities is ≤ 0.20%.

Mechanical characteristics

Section, mm σB, MPa d5, % d
Sheet metal in delivery condition of alloy VD1, ВД1А (normal plating), ВД1Б (B with plating technology) according to GOST 21631-76 (samples transverse)
0.8-10.5 ≤245 - ≥10
5-10.5 ≥335 - ≥12
0.8-10.5 ≥335 - ≥12
Extruded normal strength according to GOST 8617-81 in the delivery condition (longitudinal samples)
≥333 ≥12 -
The pressed bars normal strength in the delivery condition according to GOST 21488-97 (longitudinal samples)
100-160 ≥335 ≥6 -
8-100 ≥335 ≥8 -
Tubes extruded in the state of delivery according to GOST 18482-79 (samples, in cross-section shows the thickness of the wall)
≤5 ≥335 ≥10 -
20-40 ≥355 ≥8 -
5-20 ≥345 ≥8 -
Welded straight-seam pipes supplied according to GOST 23697-79 (samples, in the cross-section of the specified diameter of pipes)
≥156.8 ≥6 -

Description mechanical marks

Name Description
Section Section
σB Limit short-term strength
d5 Elongation after rupture
d Elongation after rupture

Our consultant will save your time

+49 (170) 650 7006
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)