By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 11KH11N2V2MF (ЭИ962)

Steel 1Х14Н14В2М (ЭИ257) Steel 13Х15Н4АМ3 (EP310; VNS-5) Steel 15X11MF (1X11MF) Steel 15Х12ВНМФ (ЭИ802) Steel 15Х12Н2МВФАБ (EP517) Steel 15Х16К5Н2МВФАБ (EP866; VNS-30) Steel 16Х11Н2В2МФ (ЭИ962А) Steel 16Х12ВМСФ5Р Steel 16X12MVSFBR (EP823) 18X11MNFB steel (EP291) Steel 18Х12ВМБФР (ЭИ993) Steel 18Х14Н4АМ3 (VNS-43) 18Kh15N3M steel (DI1) Steel 13Х11Н2В2МФ (ЭИ961; ВНС-33) Steel 20X12VNMF (EP428; 20X12VNMF-S (EP427-S)) Steel 25Х13Н2ВМФ (EP65; 2Х13НВМФ) Steel 25Х18Н10В2 (EP610) Steel 25Х18Н8В2 (ЭИ946) Steel 31Х19Н9МВБТ (ЭИ572) Steel 37Х12Н8Г8МФБ (ЭИ481) Steel 40Х15Н7Г7Ф2МС (ЭИ388) Steel 42Х11М3Ф (EP890) Steel 45Х14Н14В2М (ЭИ69) Steel 45Х14Н14СВ2М (ЭИ240) Steel X12H20T2P (EI696A) X14H8M2 steel (EP509) Cr18N13C2AMVF5P steel Steel 09Х14Н19В2БР1 (ЭИ726) Steel 01X19Yu3Bch (EP904; 02X18Yu3B) Steel 04Х15Н11С3МТ Steel 06X14H5MF Steel 06Х16Н15М3Б (ЭИ847; 06Х16Н15М3Б) 06X16H15M3K steel Steel 07Х25Н16АГЦ (EP781) Steel 08X14MF Steel 08Х15Н24В4ТР (EP164) Steel 08Х15Н25М3ТЮБ Steel 08Х15Н5Д2Т (EP410; VNS-2; EP225) Steel 08Х16Н13М2Б (ЭИ680) Steel 09X14H16B (EI694) Steel 09X14H19V2BR (EI695R) Steel 13Х14Н3В2ФР (ЭИ736; 513Л) Steel 09Х16Н13М3 (ЭИ592) Steel 09Х16Н15М3Б Steel 09Х16Н16МВ2БР (ЭП184; Х16Н16МВ2БР) Steel 09Х16Н7М2Ю (ЗИ65) 10GN2MFA steel Steel 10Х11Н20Т3Р (ЭИ696) Steel 10Х11Н23Т3МР (ЭП33; ЭЦ696) Steel 10Х12Н22Т3МРУ (EP33U) Steel 10Х15Н28В2М4Б (EP485) Steel 10Х15Н9С3Б1 (EP302) 10Х9НСМФБ steel Steel 11Х11Н2В2МФ (ЭИ962)

Designation

Name The value
Designation GOST Cyrillic 11Х11Н2В2МФ
Designation GOST Latin 11X11H2B2MF
Transliteration 11H11N2V2MF
The chemical elements 11Cr11Н2W2MoV
Name The value
Designation GOST Cyrillic ЭИ962
Designation GOST Latin EI962
Transliteration EhI962
The chemical elements -

Description

11KH11N2V2MF steel is used: for the manufacture of compressor disks, blades and other loaded parts, long operating at temperatures up to +600 °C; for the production of welding wire, used for welding parts and welding of steel structures in power engineering industry; for the manufacture of welding electrodes; solid-rolled rings from various industrial purposes; welding rings with subsequent profiling punching.

Note

Steel corrosion and heat resistant martensitic class.
The recommended maximum operating temperature for a long time (10,000 hours) +600 °C. the Temperature of intensive scaling in air +750 °C.

Standards

Name Code Standards
Sheets and stripes В33 GOST 5582-75, TU 14-1-1222-74, TU 14-1-2150-77, TU 14-1-2476-78, TU 14-1-3219-81
Classification, nomenclature and general norms В30 GOST 5632-72
Sectional and shaped rolling В32 GOST 5949-75, OST 1 90228-76, OST 1 90362-85, TU 14-1-2172-77, TU 14-11-245-88, TU 14-1-1271-75
Classification, nomenclature and general norms В20 OST 1 90005-91
Bulls. Blanks. Slabs В31 OST 3-1686-90, OST 1 90165-74, OST 1 90305-89, OST 1 90349-84, OST 1 90386-89
Metal forming. Forgings В03 TU 14-1-1530-75, TU 14-1-2902-80, TU 14-1-2918-80
Welding and cutting of metals. Soldering, riveting В05 TU 14-1-997-74, TU 14-1-997-2012

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu V Ti Mo W
TU 14-1-2918-80 0.09-0.13 ≤0.015 ≤0.03 ≤0.6 10.5-12 ≤0.6 1.5-1.8 The rest ≤0.3 0.18-0.3 ≤0.2 0.35-0.5 1.6-2
TU 14-1-2172-77 0.09-0.13 ≤0.025 ≤0.03 ≤0.6 10.5-12 ≤0.6 1.5-1.8 The rest ≤0.3 0.18-0.3 ≤0.2 0.35-0.5 1.6-2
TU 14-1-997-74 0.09-0.13 ≤0.025 ≤0.03 ≤0.6 10.5-12 ≤0.6 1.5-1.8 The rest ≤0.2 0.18-0.3 - 0.35-0.5 1.6-2
Fe is the basis.
According to TU 14-1-2902-80, TU 14-1-2172-77 and TU 14-1-2918-80 the chemical composition is given for 11Х11Н2В2МФ-Ш.

Mechanical characteristics

Section, mm t отпуска, °C sT|s0,2, MPa σB, MPa d5, % y, % kJ/m2, кДж/м2 Brinell hardness number, MPa HRC
Gradation of performance properties of the finished heat-treated parts for OST 1 90005-91
- - - 830-1030 - - - 248-302 22-33
Ring welded at OST 1 90349-84. Hardening from 1000-1020 °C in oil or air + Vacation at 540-590 °C
- - ≥833 ≥981 ≥12 ≥50 ≥588 310-388 -
- - - ≥882 ≥7 - - - -
Ring welded at OST 1 90349-84. Hardening from 1000-1020 °C in oil or air + Vacation at 650-680 °C
- - ≥735 ≥833 ≥12 ≥55 ≥686 269-321 -
- - - ≥745 ≥6 - - - -
Ring clinocerinae for OST 1 90228-76. Normalization at 1000-1020 °C + Quenching in oil or air from 1000-1020 °C + Vacation at 540-590 °C
- ≥833 ≥980 ≥10 ≥50 ≥588 311-387 -
Hot rolled sheet (of 1.5-3.9 mm) and cold rolled (0,7-3,9 mm) steel according to GOST 5582-75. Annealing in air 1000-1150 °C + Vacation at 560-900 °C, air cooling
- - ≥880 ≥10 - - - -
Hot rolled sheet (of 1.5-3.9 mm) and cold rolled (0,7-3,9 mm) steel according to GOST 5582-75. Annealing at 760-780 °C
- - - ≤830 ≥22 - - - -
Forgings 14-1-1530-75 TU, TU 14-1-2902-80, THE 14-1-2918-80. Normalization at 1000-1020 °C + Hardening from 1000-1020 °C in oil or air + Vacation
640-680 ≥735 ≥830 ≥12 ≥55 ≥680 269-321 -
540-590 ≥835 ≥980 ≥10 ≥50 ≥580 311-388 -
Bars hot rolled and forged on the other 14-1-2172-77. The longitudinal samples. Normalization at 1000-1020 °C + Quenching in oil or air from 1000-1020 °C + Vacation at 540-590 °C, air cooling
540-590 ≥833 ≥980 ≥10 ≥50 ≥588 311-388 -
640-680 ≥735 ≥833 ≥12 ≥55 ≥686 269-320 -
Bars hot rolled and forged according to GOST 5949-75. Normalization at 1000-1020 °C + Quenching in oil or air from 1000-1020 °C + Vacation
540-590 ≥835 ≥980 ≥10 ≥50 ≥588 - -
640-680 ≥735 ≥835 ≥12 ≥55 ≥686 - -

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
y The relative narrowing
kJ/m2 Toughness
HRC Rockwell hardness (indenter diamond spheroconical)

Technological properties

Name The value
Macrostructure and contamination Macrostructure of steel shall be no traces of shrinkage, voids, bubbles, fissures, fistula, delaminations, cracks, and foreign inclusions.

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)