Steel SV-08Х20Н9С2БТЮ (ЭП156)
Designation
| Name |
The value |
| Designation GOST Cyrillic |
Св-08Х20Н9С2БТЮ |
| Designation GOST Latin |
Cb-08X20H9C2BTJu |
| Transliteration |
Sv-08H20N9S2BTYu |
| The chemical elements |
08Cr20Н9С2NbTiAl |
| Name |
The value |
| Designation GOST Cyrillic |
ЭП156 |
| Designation GOST Latin |
EP156 |
| Transliteration |
EhP156 |
| The chemical elements |
- |
Description
Steel SV-08Х20Н9С2БТЮ usedfor producing welding wire diameter 1.0−6.0 mm for automatic welding in carbon dioxide and submerged-arc (an-26S) austenitic steel (12X18H9T, 12X18H10T, 08KH18N10T)
and austenitic-ferritic (08KH22N6T, 08KH18G8N2T) classes with the requirement of resistance against the ICC.
Note
Korrozionnostojkie chromium-Nickel steel alloyed with niobium, titanium and aluminum.
Standards
| Name |
Code |
Standards |
| Welding and cutting of metals. Soldering, riveting |
В05 |
TU 14-1-4981-91 |
Chemical composition
| Standard |
C |
S |
P |
Mn |
Cr |
Si |
Ni |
Fe |
Al |
Ti |
Nb |
| TU 14-1-4981-91 |
≤0.1 |
≤0.02 |
≤0.035 |
1-2 |
19-21 |
2-2.5 |
8-10 |
The rest |
0.3-0.7 |
0.6-1 |
0.6-1 |
Fe is the basis.
According to TU 14-1-4981-91, the chemical composition is given for steel grade Sv-08X20N9S2BTU (EP156).
Mechanical characteristics
| Section, mm |
σB, MPa |
| Wire in the delivery state on the other 14-1-4981-91 |
| 1-1.6 |
880-1670 |
| 2 |
780-1420 |
| 2 |
690-1030 |
Description mechanical marks
| Name |
Description |
| Section |
Section |
| σB |
Limit short-term strength |
Technological properties
| Name |
The value |
| Features of production |
The surface of wire should be clean and smooth, without cracks, delaminations, captured, sunsets, shells, dents, scale, rust, oil and other contaminants. On the surface of the wire allowed the risks (including covered), scratches, local Rabina and individual dents. The depth of these defects shall not exceed tolerances for the wire diameter. Wire comes in etched and bleached condition. |
