The tee is made of titanium, Inconel®, Hastelloy® steel
Titanium, Inconel®, Hastelloy® tees are used for changing the direction of separation of the pipeline flow of liquids and gas. May be transient and straight. The latter have all pipes the same diameter as the linking — pipes of smaller diameter, perpendicular to the main flow.
Titanium, Inconel®, Hastelloy® Patriotic tees are made of seamless pressed. They are welded to the pipeline. Thick walls designed for operation at pressures up to 100 atmospheres and a temperature of from -70°C to +450°C (depending on steel grades). For the import of low-pressure lines use stainless steel imported tees, which are made from welded pipes. At small diameters the wall thickness is 2 mm and larger up to 4 mm. it uses the following grades of steel: 10Х17Н132М2Т, 08KH18N10T, AISI 304, 12X18H10T, 316 AISI. Threaded connections are designed for sanitary water supply pipe lines, used steel 316 AISI. The ends of the tees are threaded (like BP-BP-BP). The diameters of stainless steel threaded tees are DN 6 (1/8″) — DN100 (4″).
Percentage composition of 08X18H10T (GOST 5832−72)
Supplier «Auremo» offers to buy stainless tee today on favorable terms. Large selection of tees in stock. Always in stock stainless steel tee, price — optimal from the supplier.
To buy, best price
Supplier «Auremo» offers favorable conditions to purchase a tee. The offered range of titanium, Inconel®, Hastelloy® tees complies with GOST and international quality standards. The volume of purchase and additional conditions of supply depends on the price. Buy titanium, Inconel®, Hastelloy®, and any tee pipe fittings, you can easily contact the nearest office. — phone numbers and email address of the nearest representative of the company can be found under «Contacts». Order the service «call Back». We have the best price and quality for the entire range of products.