By visiting this site, you accept the use of cookies. More about our cookie policy.

GOST 12492.14-90

GOST 12492.14−90 Profile for the case final drive of the tractor. Assortment


GOST 12492.14−90

Group B22


INTERSTATE STANDARD

PROFILE FOR HOUSING FINAL DRIVE OF THE TRACTOR

Assortment

Agricultural machinery. Section for end transmission case. Dimensions


OKP 09 3100

Date of introduction 1991−01−01

INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee on management of quality and standards from 30.03.90 N 753

3. INSTEAD OF THAT 14−2-698−86

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

   
The designation of the reference document referenced
Item number
GOST 535−88
1

5. Limitation of actions taken by Protocol No. 7−95 Interstate Council for standardization, Metrology and certification (ICS 11−95)

6. REISSUE


This standard applies to hot rolled profile for housing final drive of the tractor.

1. Shape, dimensions, limit deviations according to him, the cross sectional area of the profile shall be as specified in the drawing and in the table.

ГОСТ 12492.14-90 Профиль для корпуса конечной передачи трактора. Сортамент

         
Steel grade

The cross-sectional area, cmГОСТ 12492.14-90 Профиль для корпуса конечной передачи трактора. Сортамент

Weight of 1 m of section, kg

The moment of inertia, cmГОСТ 12492.14-90 Профиль для корпуса конечной передачи трактора. Сортамент

     

ГОСТ 12492.14-90 Профиль для корпуса конечной передачи трактора. Сортамент

ГОСТ 12492.14-90 Профиль для корпуса конечной передачи трактора. Сортамент

Ст3кп1, Ст3сп3,
Ст3пс3 according to GOST 535
26,5
20,8
1138,19
117,54

2. The curvature of the profile in the vertical and horizontal planes should not exceed 0.5% of the length.

3. Twisting of the profile around its longitudinal axis shall not exceed 1 mm per 1 m length.