By visiting this site, you accept the use of cookies. More about our cookie policy.

GOST 19053-80

STATE 12339-2016 GOST P 55433-2013 GOST P 55432-2013 GOST 4960-2009 GOST 9722-97 GOST 5494-95 GOST 19106-73 GOST 9453-75 GOST 20559-75 GOST 14086-68 GOST 9723-73 GOST 21125-75 GOST 5426-76 GOST 22025-76 GOST 13834-77 GOST 13833-77 GOST 9721-79 GOST 10285-81 GOST 12342-81 GOST 26719-85 GOST 13084-88 GOST 10096-76 GOST 2330-76 GOST 12343-79 GOST 4411-79 GOST 12338-81 GOST 26252-84 GOST 10284-84 GOST 26802-86 GOST 9849-86 GOST 3882-74 GOST 880-75 GOST 11378-75 GOST 4960-75 GOST 12601-76 GOST 12339-79 GOST 31290-2005 GOST 26630-85 GOST 26530-85 GOST 29278-92 GOST 25405-90 GOST 19046-80 GOST 25406-90 GOST 19078-80 GOST 24257-80 GOST 19065-80 GOST 24247-80 GOST 25412-90 GOST 25396-90 GOST 25400-90 GOST 25425-90 GOST 25410-82 GOST 25420-90 GOST 19074-80 GOST 19083-80 GOST 19048-80 GOST 25414-90 GOST 19062-80 GOST 25415-90 GOST 24253-80 GOST 24251-80 GOST 24249-80 GOST 24254-80 GOST 27302-87 GOST 25393-90 GOST 19067-80 GOST 25411-90 GOST 19068-80 GOST 25397-90 GOST 19059-80 GOST 19049-80 GOST 25398-90 GOST 19075-80 GOST 19061-80 GOST 20312-90 GOST 19051-80 GOST 25402-90 GOST 24252-80 GOST 25417-82 GOST 19043-80 GOST 20771-82 GOST 19081-80 GOST 19086-80 GOST 19056-80 GOST 19047-80 GOST 25421-90 GOST 25413-82 GOST 25418-82 GOST 27301-87 GOST 4872-75 GOST 19084-80 GOST 24255-80 GOST 19050-80 GOST 25401-90 GOST 19052-80 GOST 25426-90 GOST 25423-90 GOST 25399-90 GOST 19073-80 GOST 19057-80 GOST 2209-90 GOST 25403-82 GOST 19044-80 GOST 25408-90 GOST 25395-90 GOST 25409-90 GOST 25407-90 GOST 19071-80 GOST 28378-89 GOST 25419-90 GOST 19045-80 GOST 25003-81 GOST 25394-90 GOST 19077-80 GOST 19072-80 GOST 19080-80 GOST 17163-90 GOST 24250-80 GOST 25424-90 GOST 19063-80 GOST 19070-80 GOST 19076-80 GOST 24256-80 GOST 25422-90 GOST 25404-90 GOST 19064-80 GOST 24248-80 GOST 19069-80 GOST 19079-80 GOST 25416-90 GOST 19053-80 GOST 19042-80 GOST 19085-80

GOST 19053−80 cutting Inserts, replaceable carbide faceted square shape with hole and chamfers at the top. The design and dimensions (with Amendments No. 1, 2)


GOST 19053−80

Group 56


INTERSTATE STANDARD


CUTTING INSERTS, REPLACEABLE CARBIDE FACETED
SQUARE SHAPE WITH HOLE AND CHAMFERS AT THE TOP


The design and dimensions


Square throw-away (indexable) carbide cutting inserts with cylindrical
holes and secondary edges at сitting points. Design and dimensions



ISS 25.100
77.160
OKP 19 6000

Date of introduction 1982−01−01



INFORMATION DATA

1. DEVELOPED AND INTRODUCED by the Ministry of nonferrous metallurgy of the USSR

2. APPROVED AND put INTO EFFECT by Decision of the USSR State Committee for standards from 19.06.80 N 2906

3. REPLACE GOST 19053−73

4. REFERENCE NORMATIVE AND TECHNICAL DOCUMENTS

   
The designation of the reference document referenced
Item number
GOST 19042−80
4
GOST 19086−80
5

5. The expiration time limit is removed by the Resolution of Gosstandart of the USSR from 29.12.90 N 3614

6. EDITION with Amendments No. 1, 2 approved in October 1984, December 1990 (IUS 2−85, 4−91).


The requirements of this standard are mandatory.

(Added, Rev. N 2).

1. The design and dimensions of plates shall be as specified in the drawing.

ГОСТ 19053-80 Пластины режущие сменные многогранные твердосплавные квадратной формы с отверстием и фасками при вершине. Конструкция и размеры (с Изменениями N 1, 2)

________________
* Size for reference.


The marking plates of class a tolerance E:

digital: 03153−140400;

alphanumeric: SNEA-140400.

The marking plates of class admission:

digital: 03143−140400;

alphanumeric: SNCA-140400.

Designation when ordering plates from a firm alloy brand ТТ20К9, class of admission:

19 6624

0372 140400

2. The estimated mass of the plate shown in Annex 1.

3. The notation of plates according to GOST 19042.

4. Technical requirements — GOST 19086.

5. Applicable grades listed in Appendix 2.

(Added, Rev. N 2).

ANNEX 1
Reference

               
Marking plates Approximate weight of plates, g, of a solid alloy grades
  VK6
VK6-OM
VK8 ТТ7К12
Т18К6
Т8К7
Т5К10 ТТ20К9 Т14К8 T15K6
03143−140400
11,8 11,6 10,4 10,2 9,76 Of 9.23 9,07
03153−140400
             



APPENDIX 1. (Changed edition, Rev. N 2).

APPENDIX 2 (recommended). Applied grades of plates

ANNEX 2
Recommended

       
Digital signage plates The main application The additional use of Application by special order
03143−140400 N 2, N 3, N 13, N 14, N 15
N 4, N 16
N 5, N 6, N 7
03153−140400
     

N 2 — VK6-OM; N 3 — VK6; N 4 — VK8; N 5 — Т5К10; N 6 — Т14К8; N 7 — T15K6; N 13 — ТТ7К12; N 14 — ТТ78К6; N 15 — Т8К7; N 16 — ТТ20К9.


APPENDIX 2. (Added, Rev. N 2).