By visiting this site, you accept the use of cookies. More about our cookie policy.

Cast Iron S-Ni22

Designation

Name The value
Designation GOST Cyrillic S-Ni22
Designation GOST Latin S-Ni22
Transliteration S-Ni22
The chemical elements S-Ni22

Description

Cast iron S-Ni22 is used: for the manufacture of casting parts for pumps, valves, compressors, bushings, housings turbochargers, parts of the exhaust piping.

Note

Nickel cast iron. Cast iron S-Ni22 has a high coefficient of thermal expansion; a lower corrosion resistance and lower heat resistance than cast iron brand L-NiCr20−2. Cast iron S-Ni22 has good features dynamic influence down to minus 100 °C. the Magnetic properties has not.

Standards

Name Code Standards
Castings with special properties (cast iron and steel) В83 GOST 7769-82

Chemical composition

Standard C P Mn Cr Si Ni Fe Cu
GOST 7769-82 ≤3 ≤0.08 1.5-2.5 ≤0.5 1-3 21-24 The rest ≤0.5
Fe is the basis.

Mechanical characteristics

sT|s0,2, MPa σB, MPa d4 Brinell hardness number, MPa
Castings on OST 1 90077-72
170-250 370-440 20-40 130-170

Description mechanical marks

Name Description
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d4 Elongation after rupture

Physical characteristics

Temperature Е, ГПа
20 85-112

A description of the physical symbols

Name Description
r Density
l Coefficient of thermal conductivity
a The coefficient of linear expansion

Our consultant will save your time

+49 (170) 650 7006
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)