By visiting this site, you accept the use of cookies. More about our cookie policy.

Powder material S2

C2 powder material

Designation

Name The value
Designation GOST Cyrillic С2
Designation GOST Latin C2
Transliteration S2
The chemical elements Pb2

Description

Powder material C2 is used: for the manufacture by powder metallurgy of various components (plates, rings, discs, nozzles and other products according to the drawings) and designed to work in conditions of abrasive and hydroabrasive wear in friction pairs, as well as parts of moulds for hot pressing at temperatures up to 1350 °C.
Products may not be used in alkaline media.

Note

The material on the basis of carbide of silicon.

Standards

Name Code Standards
Solid alloys, metal-ceramic products and powders, metal В56 TU 14-1-4909-90

Chemical composition

Standard C Si
TU 14-1-4909-90 ≤1.6 ≤15
SiC (silicon carbide) is the basis
According to TU 14-1-4909-90, the chemical composition is given for C2-based powder material on the basis of self-bonded silicon carbide for parts of hot pressing molds. For the material C2 intended for the production of other products, the mass fraction of free silicon in the material is not more than 22.00%, the mass fraction of free carbon is not more than 1.30%.

Physical characteristics

Temperature r, кг/м3
20 29500

A description of the physical symbols

Name Description
r Density

Technological properties

Name The value
Features of production In the manufacture of products used raw materials: - grinding materials from silicon carbide according to GOST 26327; - low sulfur petroleum cokes according to GOST 22898; - silicon crystal according to GOST 2169.

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)