By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy 52K13F (52КФА)

Designation

Name The value
Designation GOST Cyrillic 52К13Ф
Designation GOST Latin 52K13F
Transliteration 52K13F
The chemical elements 52Co13P
Name The value
Designation GOST Cyrillic 52КФА
Designation GOST Latin 52KFA
Transliteration 52KFA
The chemical elements 52CoP

Description

Alloy 52K13 °F used: for the production of small permanent magnets.

Note

Alloy with magnetic energy (16−24)·103 TA/m.
Depending on the content of vanadium and the temperature property can be obtained the desired ratio of the coercive force and residual induction in the range (4,8−32)·103 A/m and 1.2 to 0.65 T. the Alloy becomes magnetic properties Locle cold deformation of 70−90% and subsequent tempering.
Alloy anisotropic. Wire of alloy grade 52K13 °F after a special thermomechanical treatment has a coercive force (32−40)·103 A/m at induction 0,80- 1,0 T.

Standards

Name Code Standards
Classification, nomenclature and general norms В30 GOST 10994-74
Sheets and stripes В33 TU 14-1-826-74
Sectional and shaped rolling В32 TU 14-131-851-92, TU 14-11-245-88

Chemical composition

Standard C S P Mn Cr Si Ni Fe V Co
GOST 10994-74 ≤0.12 ≤0.02 ≤0.025 ≤0.5 ≤0.5 ≤0.5 ≤0.7 The rest 12.6-13.5 52-54
TU 14-1-826-74 ≤0.15 ≤0.02 ≤0.025 ≤0.5 ≤0.5 ≤0.5 ≤0.7 The rest 12.6-13.5 52-54
Co is the basis.
According to TU 14-1-826-74, the chemical composition is given for the alloy 52K13F (52KFA).

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)