By visiting this site, you accept the use of cookies. More about our cookie policy.

Alloy AK5M7

Designation

Name The value
Designation GOST Cyrillic АК5М7
Designation GOST Latin AK5M7
Transliteration AK5M7
The chemical elements -

Description

Alloy AK5M7 used: for the manufacture of ingots and shaped castings by various casting methods (sand casting, investment casting, gravity die casting, pressure casting).

Note

Aluminum foundry alloy of the system Al-Si-Cu.

Standards

Name Code Standards
Non-ferrous metals, including rare metals, and their alloys В51 GOST 1583-93
Castings from non-ferrous metals and alloys В84 OST 1 80029-83

Chemical composition

Standard Mn Si Ni Fe Cu Al Zn Mg
GOST 1583-93 ≤0.5 4.5-6.5 ≤0.5 ≤1.2 6-8 The rest ≤0.6 0.2-0.5
Al is the base.
According to GOST 1583-93, the iron content is specified for casting in sand molds and for investment models. The iron content for molding in the mold is ≤ 1.20%, when casting under pressure ≤ 1.30%. The amount of allowable impurities should be for casting in sand molds and for investment models ≤ 2.70%, casting in chill molds ≤ 2.70%, injection molding ≤ 3.00%. The total content of lead, tin and antimony should be ≤ 0.30%.

Mechanical characteristics

σB, MPa Brinell hardness number, MPa
Casting. Without heat treatment
≥127 ≥70
≥157 ≥70
≥118 ≥80
Casting. Mode T1: Artificial aging without prior tempering at 170-190 °C (exposure 1-5 hours)
≥147 ≥80
≥167 ≥90

Description mechanical marks

Name Description
σB Limit short-term strength

Physical characteristics

Temperature r, кг/м3
20 2850

A description of the physical symbols

Name Description
l Coefficient of thermal conductivity

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)