Alloy ХН54МВТЮЛ (ЧС94)
Alloy ZhS3LS
Alloy KhN63MYUTBV (SZHL-800; EK112)
Alloy KhN58KTVYUMBL (ChS104)
Alloy KhN58KVTYUMBL (ChS70; CH25)
Alloy KhN57KVYUTMBRL (ChS88U)
Alloy KhN57KVYUTMBL (ChS88)
Alloy KhN57VMTYUBL (ChS91)
Alloy KhN54MVTYUL (ChS94)
Alloy CrN35Zh14AMTL
Alloy LK4
Alloy L114
Alloy ZhS6K
Alloy ZhS3DK
Alloy VZHL2M
Alloy VZHL15
Alloy B56
Alloy B3K
Alloy Biduloid
Alloy 45X26H33S2B2
Alloy 45Х26Н23С2Б2
Alloy 12XH28MDTL (EI629)
Alloy 06Х20Н10М3Д3С4Л (06Х20Н10М3Д3С4)
Designation
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ХН54МВТЮЛ |
| Designation GOST Latin | XH54MBTJuL |
| Transliteration | HN54MVTYuL |
| The chemical elements | CrNi54CuВTeAl |
| Name | The value |
|---|---|
| Designation GOST Cyrillic | ЧС94 |
| Designation GOST Latin | ChC94 |
| Transliteration | ChS94 |
| The chemical elements | ЧPb94 |
Description
Alloy ХН54МВТЮЛ used: for the manufacture of vacuum casting castings for critical parts of power engineering resistant to abrasion and high temperatures.
Note
Heat resistant and wear resistant casting Nickel-based alloy.
Standards
| Name | Code | Standards |
|---|---|---|
| Sectional and shaped rolling | В32 | TU 14-1-4631-89 |
Chemical composition
| Standard | C | S | P | Mn | Cr | Si | Ni | Fe | Cu | N | Al | B | Ti | Mo | Sb | Pb | Bi | W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TU 14-1-4631-89 | 0.11-0.17 | ≤0.008 | ≤0.01 | ≤0.2 | 13-14 | 1-2 | The rest | 2.5-3.5 | ≤0.1 | ≤0.02 | 2-3 | 0.065 | 2-3 | 12.2-13.2 | ≤0.001 | ≤0.001 | ≤0.001 | 8.2-9.8 |
Ni is the basis.
According to TU 14-1-4631-89 the chemical composition is given for the alloy KhN54MVTYUL-VI (ChS94-VI). Mass fraction of boron is calculated. Additives of calcium and magnesium in the amount of 0.010% of each calculated. Mass fractions of boron, calcium and magnesium are not determined, but are recorded in the certificate.
According to TU 14-1-4631-89 the chemical composition is given for the alloy KhN54MVTYUL-VI (ChS94-VI). Mass fraction of boron is calculated. Additives of calcium and magnesium in the amount of 0.010% of each calculated. Mass fractions of boron, calcium and magnesium are not determined, but are recorded in the certificate.
