By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel 08Х14МФ

Steel 1Х14Н14В2М (ЭИ257) Steel 13Х15Н4АМ3 (EP310; VNS-5) Steel 15X11MF (1X11MF) Steel 15Х12ВНМФ (ЭИ802) Steel 15Х12Н2МВФАБ (EP517) Steel 15Х16К5Н2МВФАБ (EP866; VNS-30) Steel 16Х11Н2В2МФ (ЭИ962А) Steel 16Х12ВМСФ5Р Steel 16X12MVSFBR (EP823) 18X11MNFB steel (EP291) Steel 18Х12ВМБФР (ЭИ993) Steel 18Х14Н4АМ3 (VNS-43) 18Kh15N3M steel (DI1) Steel 13Х11Н2В2МФ (ЭИ961; ВНС-33) Steel 20X12VNMF (EP428; 20X12VNMF-S (EP427-S)) Steel 25Х13Н2ВМФ (EP65; 2Х13НВМФ) Steel 25Х18Н10В2 (EP610) Steel 25Х18Н8В2 (ЭИ946) Steel 31Х19Н9МВБТ (ЭИ572) Steel 37Х12Н8Г8МФБ (ЭИ481) Steel 40Х15Н7Г7Ф2МС (ЭИ388) Steel 42Х11М3Ф (EP890) Steel 45Х14Н14В2М (ЭИ69) Steel 45Х14Н14СВ2М (ЭИ240) Steel X12H20T2P (EI696A) X14H8M2 steel (EP509) Cr18N13C2AMVF5P steel Steel 09Х14Н19В2БР1 (ЭИ726) Steel 01X19Yu3Bch (EP904; 02X18Yu3B) Steel 04Х15Н11С3МТ Steel 06X14H5MF Steel 06Х16Н15М3Б (ЭИ847; 06Х16Н15М3Б) 06X16H15M3K steel Steel 07Х25Н16АГЦ (EP781) Steel 08X14MF Steel 08Х15Н24В4ТР (EP164) Steel 08Х15Н25М3ТЮБ Steel 08Х15Н5Д2Т (EP410; VNS-2; EP225) Steel 08Х16Н13М2Б (ЭИ680) Steel 09X14H16B (EI694) Steel 09X14H19V2BR (EI695R) Steel 13Х14Н3В2ФР (ЭИ736; 513Л) Steel 09Х16Н13М3 (ЭИ592) Steel 09Х16Н15М3Б Steel 09Х16Н16МВ2БР (ЭП184; Х16Н16МВ2БР) Steel 09Х16Н7М2Ю (ЗИ65) 10GN2MFA steel Steel 10Х11Н20Т3Р (ЭИ696) Steel 10Х11Н23Т3МР (ЭП33; ЭЦ696) Steel 10Х12Н22Т3МРУ (EP33U) Steel 10Х15Н28В2М4Б (EP485) Steel 10Х15Н9С3Б1 (EP302) 10Х9НСМФБ steel Steel 11Х11Н2В2МФ (ЭИ962)

Designation

Name The value
Designation GOST Cyrillic 08Х14МФ
Designation GOST Latin 08X14MF
Transliteration 08H14MF
The chemical elements 08Cr14MoV

Description

08Х14МФ steel is used: for the production of billets and bars intended for the manufacture of pipes; steam boilers, steam pipelines and collectors with high and supercritical steam parameters; parts and equipment, power engineering, nuclear and thermal power plants.

Note

High-chromium steel martensite-ferritic class.

Standards

Name Code Standards
Sectional and shaped rolling В32 TU 14-1-1529-2003
Sheets and stripes В33 TU 14-105-549-92
Pipes steel and connecting parts to them В62 TU 14-3-1808-91, TU 1361-023-00212179-2005

Chemical composition

Standard C S P Mn Cr Si Fe V Mo
TU 14-1-1529-2003 0.05-0.1 ≤0.02 ≤0.035 0.8-1.2 13-14.8 0.2-0.45 The rest 0.15-0.3 0.2-0.4
Fe is the basis.
According to TU 14-1-1529-2003, the mass fraction of the residual elements: tungsten, nickel and copper should meet the requirements of GOST 5632. For steel 08Х14МФ-Ш the sulfur content should be ≤ 0,15% phosphorus content ≤ 0,35%.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, %
The tubular billet. Normalization at 1000-1030 °C, air cooling + Vacation at 750-770 °C (aged for at least 3 h), air cooling
25 ≥345 ≥540 ≥20
Pipe seamless cold and warm on the other 1361-023-00212179-2005
- 245-392 ≥441 ≥25
- ≥196 - -
- ≥176 - -
- 245-490 ≥441 ≥25

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture

Technological properties

Name The value
Weldability Has good weldability.
Corrosion resistance Stainless steel, corrosion resistant, okolnostima steel.

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)