By visiting this site, you accept the use of cookies. More about our cookie policy.

Steel С590

Designation

Name The value
Designation GOST Cyrillic С590
Designation GOST Latin C590
Transliteration S590
The chemical elements -

Description

С590 steel is used: for the manufacture of hot-rolled structural shapes (angles, I-beams, channels), sheet, universal broadband rental and roll-formed profiles designed for construction of steel structures with welded and other connections.

Standards

Name Code Standards
Classification, nomenclature and general norms В20 GOST 27772-88

Chemical composition

Standard C S P Mn Cr Si Ni Fe Cu N As V Mo
GOST 27772-88 ≤0.15 ≤0.035 ≤0.035 1.3-1.7 ≤0.3 0.4-0.7 ≤0.3 The rest ≤0.3 ≤0.008 ≤0.08 0.07-0.15 0.15-0.25
Fe is the basis.
According to GOST 27772-88 for steel smelted in electric furnaces, the content of N ≤ 0.012% is allowed. When smelting steel from the Kerch ore, the mass fraction of arsenic does not exceed 0.15%, while the mass fraction of phosphorus should not be more than 0.030%.

Mechanical characteristics

Section, mm sT|s0,2, MPa σB, MPa d5, % kJ/m2, кДж/м2
Plates and wide universal rental in the state of delivery (KCU-40 °C)
10-36 ≥590 ≥685 ≥14 ≥343

Description mechanical marks

Name Description
Section Section
sT|s0,2 Yield strength or limit of proportionality with a tolerance for residual deformation of 0.2%
σB Limit short-term strength
d5 Elongation after rupture
kJ/m2 Toughness

Technological properties

Name The value
Weldability without restrictions

Our consultant will save your time

+49(1516) 758 59 40
Telegram:
WhatsApp:

Subscription

Special offers and discounts. :)