Rod, wire, tube, sheet made of Inconel 706
Advantages of alloy
Inconel 706 is a heat-resisting chrome-nickel alloy which was invented in the USA. This alloy corresponds a lucky combination of high impact hardness, mechanical resistance, and a good tooling quality. Characteristics of alloy Inconel 706 are identical with characteristics of Inconel 718. However, the first one is easier amenable to mechanical working. Nickel and chrome give this alloy a high oxidation resistance. During a process of heating, they form an oxide film on a surface. It increases a resistance to an aggressive environment. Titanium and niobium are the main disperse-reinforcing components of alloy. A presence of aluminium in alloy makes a positive influence on a workability. A dispersive reinforce of alloy by exposure route of thermal precipitations guarantees an improving of required delayed quench properties. As a result, it increases a resistance of welded seams to cracking.
Chemical composition of alloy
|Mn||C||Si||B||Cr||Cu||Mo||Ni||Co||S + P||Al||Fe||Nb|
|0.35||0.08||0.35||0.006||17−21||0,2−0.8||2 8−8.3||50−55||1.0||to 0,015||0,65−1.15||the rest||4,7−5.5|
Alloy combines a good workability and a high strength. It is utilized in airspace industry, motor industry, for manufacturing drive shafts, turbine cases, alloy wheels, diffuser cases, compressor shafts, disc plates etc. Besides, this alloy is used in a manufacture of gas turbines.
This alloy has a high plasticity and it can satisfactory be taken to molding. But it is disposed to a hammer hardening. That is why it must be cut at small speeds with a special tool. Welding is possible only after previous heating details to 100−120°C with further annealing.
|limitedly weldable||welding is possible at heating to 100−120°С and last heat treating|
|hardly weldable||in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding, to heat it up to 200−300°C, to do a heat treating (annealing) after welding|
|weldable without stint||welding is done without further heat treating or previous heating|
Buy Inconel at a bargain price
«Auremo» company specializes in a supply of European special steels. All products are certificated. A quality is guaranteed by rigorous technology compliance of manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy Inconel 706 alloy by connecting us with a convenient way to you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that fit your individual requirements. Buy Inconel 706 alloy in a moment! There is an affordable Inconel 706 alloy price from a supplier.
Inconel 706 alloy supplier
«Auremo» Inconel 706 alloy supplier offers to buy goods on the most favorable terms. A wide range of goods of a high quality is in stock. Inconel 706 alloy price depends on order quantity and additional conditions of supply. If you buy products by wholesale, you will be given special discounts. An availability of products and efficiency of delivery are conditioned by a fact that we have offices in Moscow, St. Petersburg and cities of Central Europe.