By visiting this site, you accept the use of cookies. More about our cookie policy.

Rod, wire, tube, sheet, strip made of HN62MWKJU

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
XN60YU EI559A 2.4816 N06600 NiCr15Fe Buy from stock, view availability
XN60YU EI559A 2.4851 N06601 NiCr23Fe15 Buy from stock, view availability
XN60YU EI559A 2.4642 N06602 NiCr25FeAIY Buy from stock, view availability
XN60YU EI559A 2.4817 N06600 NiCr15Fe Buy from stock, view availability

Technical characteristics

Heat-resisting nickel alloy HN62MWKJU is intended for manufacturing turbine blades that are exploited at a temperature of not higher than 900 °C. The main requirements are conditioned by the latest developments of engine constructions, continuous increasing of plasticity, resistance to low-cycle and thermal fatigue, heat resistance, resistance to an effect of gas environment. Material of modern engines for turbine blades must possess a high resistance to breakage at thermal and low-cycle fatigues which are the main types of breakage. A risk of breakage can increase by surface reactions. They appear because of grain boundary softening and gas corrosion.

Percentage composition according to GOST 5632−72

P S Ce Cr Fe C Mo Mn Si Ni B Al Co W
≤0,015 ≤0,011 ≤0,02 8.5 — 10.5 ≤4 ≤0.1 9 — 11,5 ≤0,3 ≤0,6 56.034 — 70 ≤0,02 4.2 — 4.9 4 — 6 4.3 — 6

Physical characteristics at a temperature 20°C

Bar Heat treatment

sв MPa

sT MPa

d5%

y %

KCU kJ/m2

GOST 23705−79 Thermohardening and age-hardening 980−1220 760−860 8−24 11−28 147−490

Physical characteristics at a temperature change

a 10 6

r
Degree 1/Degree kg/m3
20 11 8100
200 12.6  
400 13.4  
800 14.7  

Welding

Type Description
limitedly weldable welding is possible at heating to 100−120°С and last heat treating
hardly weldable in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, to do a heat treating (annealing) after welding
weldable
without stint
welding is done without further heat treating or previous heating

HN62MWKJU alloy supplier

«Auremo» HN62MWKJU alloy supplier proposes to buy rod, wire, pipe for the most favorable HN62MWKJU alloy price. A wide range of goods of a high quality is in stock. An availability of products and efficiency of delivery are conditioned by a fact that we have offices are in Moscow, St. Petersburg and cities of Central Europe. You can easily buy HN62MWKJU alloy. HN62MWKJU alloy price depends on order quantity and additional conditions of supply. A quality is compliant with GOST (all-Union State Standards) and International Standards. If you buy HN62MWKJU alloy by wholesale, you will be given special discounts.

Buy at a bargain HN62MWKJU alloy price

All products are certificated. A quality is guaranteed by rigorous technological compliance of a manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy HN62MWKJU alloy by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. HN62MWKJU rod, bar, pipe, wire are always in stock. Buy goods in HN62MWKJU alloy supplier.