By visiting this site, you accept the use of cookies. More about our cookie policy.

Dural Corner

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
D1 1110 Buy from stock, view availability
D16 1160 3.1355 AA2024 AlCuMg2 Buy from stock, view availability
D18 Buy from stock, view availability

Production

Dural angle is made of aluminum alloy, alloyed with copper 4 - 5%, a small amount of manganese, 0,8% - 1% and magnesium about 2%. Thanks to a balanced combination of components, the material acquires strength while retaining the lightness of aluminum. Sometimes additional components, such as graphite, are introduced into the composition. To increase strength, the alloy is subjected to rapid cooling after hardening, and then at ambient temperature is kept for several days. But the material partially loses its resistance to corrosion. Therefore, for critical components it is additionally clad - coated with a thin layer of aluminum - to improve resistance to external weathering.

Assortment

The following grades are used: D1, D18, D16, D19, V65, VAD. Manufacturing is regulated by GOST 8617-81 or 4784-97. Corners are produced by hot or cold rolling, sometimes milling is used. A distinction is made between equal-shelved angles, when both sides of the angle is the same, and the angle is not equal. The dimensions of the flanges - from one centimetre to 12 cm. the thickness of the metal is from 1.2 to 3 mm. The length can be up to 12 meters. At the company from the produced batch is sampled to check for microcracks, irregularities, compliance with dimensions and surface finish.

Percentage composition of D1 alloy

Fe Al Cr Mn Cu Zn Mg Si Ti Impurities
≤0,7 92-95,5 ≤0,1 0,4-1 3,5-4,5 ≤0,25 0,4-0,8 0,2-0,8 ≤0,15 ≤0,15

Percentage composition of D16 alloy

Fe Al Cr Mn Cu Zn Mg Si Ti+Zr Impurities
≤0,5 91-94,7 ≤0,1 0,3-0,9 3,8-4,9 ≤0,25 1,2-1,8 ≤0,5 ≤0,2 ≤0,15

Percentage composition of D18 alloy

Fe Al Cr Mn Cu Zn Mg Si Ti Impurities
≤0,5 94,35-97,6 ≤0,1 ≤0,2 2,2-2,8 ≤0,1 0,2-0,5 ≤0,5 --- ≤0,15

Advantages of

Low weight, strength, good manufacturability. Dural corners are easy to install, connected with other materials by welding. Another important advantage is a low price. These advantages allow the use of dural corners in almost all areas of industry or construction. The most complex constructions can be made of it. Due to the low weight, the structures have a high specific strength.

Application

In construction, dural corners are the basis for prefabricated structures, greenhouse frames, winter garden frames, door and window frames, as well as airframe and light ship frames. Most often duralumin angles of D16 alloy grade are used. The main parameters are presented in the table below.

Duralumin D16 angle

Side, mm Thickness of wall, mm Price, per kg
10x10 1,2 negotiated
15x15 1,5 60 - 80 р.
20x20 2 100 - 115 р.
30x30 2 170 - 180 р.
30x30 3 200- 250 р.
40x40 4 400 - 450 р.
50x50 4 500 - 580 р.
50x50 5 600 - 680 р.

Supplier

The supplier "Auremo" offers to buy duralumin corner today on favorable terms. Large selection of semi-finished products in stock. Storage, transportation, packing and temporary protection against corrosion are regulated (GOST 9510-93). Always in stock duralumin angle, the price - the best from the supplier. Buy today. Wholesale customers price - favorable.

Buy at a bargain price

Auremo" offers to buy duralumin corner on favorable terms. The widest range of products for large-scale productions is presented in the warehouse. We have attractive terms for retail buyers as well. Always available duralumin corner, the price - due to the technological features of production without the inclusion of additional costs. In this segment the company "Auremo" is a profitable supplier. Today the best price from the supplier. We are waiting for your orders.