By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Plate made of bronze

Bronze plate

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
БРОФ6.5-0.15 Buy from stock, view availability
БрОЦ4-3 Buy from stock, view availability
БрКМц3-1 ~C65500 CuSi3Mn1 Buy from stock, view availability
БрБ2 2.1447 CuBe2 Buy from stock, view availability
БрХ1 Buy from stock, view availability
БрХ1Цр Buy from stock, view availability

Advantages

Bronze plate possesses high level of strength, elasticity, plasticity, forgeability. Bronze plate can be perfectly exposed to any machining treatment including cutting, stamping, drilling. It also possesses resistant to corrosion, to action of atmospheric moisture and sea water. Extra consistent and resistant to corrosion plate is made of beryllium copper of grade Cu2Be (0.2−0.5 nickel alloyed). Its advantages can be also improved by an additional heat treatment. Bronze plate is non-magnetic, but at the same time it greatly conducts heat and electric current. High reliability, durability in combination with its relatively low cost make it popular in many spheres of national economy.

Bronze grade

Hardness HB -1

Melting point (°С) σv (MPa)
2.1020CuSn6 70−90 MPa 995° 400−800
CuSn4Zn3 150−170 MPa 1045° 430−880
CuSi3Mn1 70−150 MPa 1030° 350−760
CuBe2 130−150 MPa 995° 400−950

Note: A range σ in (MPa) is given for soft/hard alloy.

Manufacture of bronze plate

Put it bluntly, bronze plate is a semi-fabricate that has rectangular shape with a thickness of more than 25 mm. It can be made out of various alloys (mostly Cu1Cr, Mn2Ni, Co5SiCr, CuCr1Zr) with a help of casting method according to GOST 18 175, TC 48−21−779−85.

TC Marking Sizes of bronze plate
48−21−779−85 Cu1Cr, Mn2Cr, 5CoSiCr, CuCr1Zr. 30−150x600−3000x6ОО-4000

Marking of bronze plates

— of rectangular cross section;

— hot-rolled;

— without pointing of manufacturing accuracy and/or condition of delivery.

Application

There can be manufactured various engine components, including shafts, gears, guides, slides, wedges. They are used in a field of mechanical engineering, in aerospace and motor-vehicle engineering. It is used for a manufacture of water propellers, shafts, control blades in shipbuilding. It is used for a manufacture of contact strips, connectors, generator parts, transformers items, non-magnetic fitting and some parts of tools in electrical engineering. It is used for carrying out decorative finishing of interior and exterior in building. Plate of chromium alloyed bronze is usually used for casting of titanium and other titanium alloys. It is much-requested in engraving works and art castings.

Bronze plate supplier

«Auremo» bronze plate supplier proposes to buy bronze mill-products for the most favorable bronze plate price. There is a wide range of goods of a high quality in stock. They comply with GOST and International Standards of quality. You can easily buy bronze plate in a supplier. Bronze plate price depends on order quantity and additional conditions of supply. If you buy bronze plate by wholesale, you will be given special discounts. Availability of products and efficiency of delivery are conditioned by a fact that our offices are located in Moscow, St. Petersburg and cities of Central Europe. Buy bronze plate in a moment. Bronze plate with a thickness of up to 40 mm, with a length of 2500−4000 mm, with breadth of not more than 2500 mm (with width and length tolerances up to +40 mm) is delivered in trimmed off condition. Bronze plate with thickness of not more than 40 mm is delivered untrimmed with technological width (up to 75 mm) and length (up to 150 mm) tolerances.

Buy at a bargain bronze plate price

You have to take into account a range of factors when choosing bronze alloys. Wide selection of bronze metal-roll for order in advance is resented in «Auremo» bronze plate supplier. Our company offers to buy bronze plate. Bronze plate price forms according to technological details of production without including additional expenses. Our specialists are always ready to help when selecting required products, which determine capability and reliability of future equipment. We guarantee a high quality of products and fast delivery. You can find all information about goods on company’s web-site. We offer discounts from bronze plate supplier, for regular customers.