By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

HN38WT pipe, wire, rod


Grade analogue W. Nr. Aisi Uns En Order
~ХН38ВТ EI703 2.4858 N08825 NiCr21Mo Buy from stock, view availability

Technical characteristics

Steel of grade HN38WT is a heat-resistant high-alloyed carbon steel. It consists of nickel (34−38%), iron (38−47%), chrome (-14−16%). Titanium (1,1−1,5%), copper (<0.25%), phosphorus (<0.03%), mangan (1-2%), wolframium (2,3-3,5%), molybdenum (<0,3%), sulfur (0,02%) should be added to charge mixture in the capacity of masteralloys. HN38WT grade relates to a category of constructional steels that serve as a basis of manufacturing the various units. It can also be a basis for details of different building constructions that work in aggressive conditions. This alloy is hardly weldable. It is necessary to do a previous heating to 200-300°С with an annealing (a final heat treatment) to increase reliability of seams.


High-alloyed steel of an actual grade smelts in a vacuum arc furnace. This steel differs with hardness, good wearing quality, corrosive resistance. It is relatively not very expensive. It is widely used as a bearing material.

Chemical composition of alloy

GOST Cr Ni W Mn Ti Si Cu Mo P Fe S
5632−72 14−16 34−38 2.3−3.5 1.0−2.0 1.1−1.5 ≤0,6 ≤0,25 ≤0,3 ≤0,03 the rest <0.02

Aiming to increase a hardness and wearing quality, an alloy must be carburized. At the beginning jumping-up temperature of goods is 1170 °C; in the end a temperature is 850 °C. Finished bar sections in the forms of wire, rod or bar are cooled in air.


Type Description
limitedly weldable welding is possible at heating to 100−120°С and last heat treating
hardly weldable in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, to do a heat treatment (annealing) after welding
without stint
welding is done without further heat treating or previous heating


It is used in products of high-temperature installations that are exploited in mechanical engineering, petrochemical industry. Semi-fabricates of grade HN38WT are indispensable in manufacture of disks, flat springs, fasteners that can work long-term at temperatures of <650°. Operational use of products is limited with a maximum temperature of 850°C. If a temperature is higher, there appears an active oxide scale formation. Rod is used in metallurgic, chemical, textile industries. Wire is used when welding a steel. Bar is in request when building a structural constructions. Inescapable heat treatment of seams gives more reliable construction joints. Bar, wire, rod can be used in building of small objects, in decoration, in interior finishing. Grids and various protections can be made of a wire.

HN38WT pipe, wire, rod supplier

«Auremo» supplier offers to buy stainless steel for a reasonable HN38WT pipe, wire, rod price by wholesale. There is a wide range of half-finished goods in stock. Rod, wire, pipe HN38WT are always in stock. You can buy them for an affordable price from HN38WT pipe, wire, rod supplier. Buy HN38WT pipe, wire, rod right now! HN38WT pipe, wire, rod price is privileged for wholesale customers.

Buy at a bargain price

All products are certificated. A quality is guaranteed by rigorous technological compliance of a manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy HN38WT pipe, wire, rod by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. Pipe, wire, rod made of HN38WT are always in stock. Their price depends on order quantity and additional conditions of supply.