By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Rod, wire, tube, sheet, strip made of HN60JU alloy

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
ХН60Ю EI559A 2.4816 N06600 NiCr15Fe Delivery from the stock, in stock
~ХН60Ю EI559A 2.4851 N06601 NiCr23Fe15 Delivery from the stock, in stock
~~ХН60Ю EI559A ~2.4642 N06602 NiCr25FeAIY Delivery from the stock, in stock
~~~ХН60Ю EI559A 2.4817 ~N06600 ~NiCr15Fe Delivery from the stock, in stock

Technical characteristics

Heat-resisting alloy of this grade is used in manufacturing details of gas transmission systems, tools of a short-term service at a temperature of 1250 °C or tools with limited service life at a temperature <1100°C. Unique properties of a material are conditioned by its well-balanced composition. With an appearance of similar materials, there has become a possibility to refine a lot of production methods, where a manufacturing is coupled with a force of high-temperature and aggressive environments.

Percentage composition according to GOST 5632−72

S Ni Cr Ba Al Si C Fe Mn P Ce
≤0,02 55 — 58 15 — 18 ≤0.1 2.6 — 3.5 ≤0,8 ≤0.1 19.13 — 27.4 ≤ 0.3 ≤0,02 ≤0.03

Mechanical characteristics

Dimension

sв MPa

sT MPa

d5%

y %

to C

Cold-rolled sheet 750 360 40 52 20o C

It has a good workability and perfect mechanical characteristics. Wearing quality, corrosive resistance in a wide temperature range allow using alloy as a bearing material.

Characteristics conventions:

Description Identification
Short resistance to rupture [MPa] sv
Flow limit (proportional limit load) for permanent change of form [MPa] sT
Percent elongation at fracture [ % ] d5
Contraction ratio [ % ] y
Impact hardness [ kJ/m2] KCU
Brinell hardness [MPa] HB

Physical properties depending on a temperature:

E 10— 5

a 10 6

l r
Degree MPa 1/Degree V/(m/degree) kg/m3
20 2.1     7900
200   13.08 13  
400   14.2 19.6  
800 1.69 15.18 40.2  

HN60JU alloy supplier

«Auremo» HN60JU alloy supplier proposes to buy goods for the most favorable HN60JU alloy price. There is a wide range of goods of a high quality in stock. An availability of products and efficiency of delivery are conditioned by a fact that our offices are located in Moscow, St. Petersburg and cities of Central Europe. You can easily buy these products. HN60JU alloy price depends on order quantity and additional conditions of supply. A quality complies with GOST (all-Union State Standards) and International Standards. If you buy HN60JU alloy by wholesale, you will be given special discounts.

Buy HN60JU alloy at a bargain price

All products are certificated. A quality is guaranteed by rigorous technology compliance of a manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy HN60JU alloy by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are located in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. HN60JU wire, pipe, rod, bar are always in stock. Buy goods in HN60JU alloy supplier for an affordable HN60JU alloy price.