By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Fecral wire Cr15Al5

Fecral wire Cr15Al5

Technical characteristics

Fecral is an ideal alloy with an excessive specific real resistance (1,20−1,30 Ohm-mm2/m) which combine a heat resistance up to 1450 °C. It is claimed to be indispensable at temperature extremes. These properties allow using this alloy extensively while manufacturing heating units. Such wire possesses a variety of further advantages. It has a perfect corrosive resistance on air, in argon, in a vacuum, oxidizing, sulfur-containing and carboniferous environments. It shows not very high relative density (7,2 g/cm3), but it has a great yield limit, which allows using this with a minimum diameter wire. It also has an excellent firmness against the mechanical loads. The main advantage is its price: It costs just 20% of the similar materials cost. Among the demerits of alloy, there is only its frailty, which essentially complicates a process of a manufacture strips and thin wires. It can be eradicated with a help of nickel miscellaneous or analogues elements, but hereby final cost of a material will be increased.

Percentage composition GOST 10994−74

Alloy S P C Ce Mo Ca Ni Ti Si Mn Al Fe Cr
Cr23Al5 ≤0.015 ≤0.03 ≤0.05 ≤0.1 --- ≤0.1 ≤0.6 0.15 — 0.6 ≤0.6 ≤0.3 4.6 — 5.5 --- 21.5 — 23.5

Use

Fecral wire is utilized for a manufacturing heating elements for domestic electric appliances. It is indispensable in producing the industrial electric furnaces. It is utilized also in convection heaters, blow heaters, hair driers, rheostats, and resistors while producing the nests of resistance. A huge application is conditioned upon a high temperature of melting and excessive real resistance.

Manufacture

Due to alloy frailty, a method of a cold work can not be applicable. Consequently, for drawing a filament are used special energy-intensive methods, which reflect on a pricing of alloy. At a manufacture, usually, are used the methods of drawing and pressing. At a later stage, a finished product is going to be coiled or spooled. You can easily buy Cr15Al5 via the Internet. Fecral filament is one of the most popular and preferable material among industrialists. Winning consumer properties, excellent technical properties and low price gain a contemporary market. Nowadays, fecral almost displaced nickel from this section. In comparison with nichrome, a low price is caused by using cheap aluminium instead of expensive nickel. A cost of wire depends on a diameter.

Supplier

«Auremo» supplier offers to buy fecral wire Cr15Al5 by wholesale. There is a wide range of half-finished goods in stock. An affordable fecral wire Cr15Al5 price from a supplier. You can easily buy it right now. Fecral wire Cr15Al5 price is privileged for wholesale customers.

Buy fecral wire Cr15Al5 at a bargain price

«Auremo» fecral wire Cr15Al5 supplier implements rolled-metal products throughout the European market by wholesale. The terms of delivery take a minimum of time. In our company, you can buy fecral wire Cr15Al5 at a bargain price. We are working with experienced managers who are the experts of modern marketing. They can quickly help to buy fecral wire of any grade. The introduced goods in stock are certified. «Auremo» company is a profitable fecral wire Cr15Al5 supplier. A quality complies with GOST (all-Union State Standards) and International Standards. A cost of Cr15Al5 depends on order quantity, additional conditions of supply. Fecral wire Cr15Al5 price is privileged for wholesale customers. «Auremo» company offers to make purchases by wholesale. An affordable fecral wire Cr15Al5 price from a fecral wire Cr15Al5 supplier.