By visiting this site, you accept the use of cookies. More about our cookie policy.

Sheet, strip, foil, plate made of Inconel 600, 601

Wire, rod (bar) Sheet (plate), strip (foil)

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
XN60YU EI559A 2.4816 N06600 NiCr15Fe Buy from stock, view availability
XN60YU EI559A 2.4851 N06601 NiCr23Fe15 Buy from stock, view availability

Technical characteristics

European steel of grade Inconel 600 ® corresponds an alloy on a chrome-nickel basis (with additives of silicon, cuprum). It is used for details that need a high thermal and corrosion firmness. This alloy was invented for working temperatures of about 2000°F. A content of nickel in alloy makes it resistant to corrosion under an effect of organic or inorganic compounds. It gives the alloy an excellent resistance to chloride-ionic corrosion cracking. Marketing general names of alloy: Nickelvac ® 600, Ferrochronin ® 600, Werkstoff Nr.2.4816. This alloy is a standard material that possesses a high thermal and corrosive resistance. It also has a great stregth, plasticity, and it can satisfactory be taken to molding. An alloy may be shored up and thermo-hardened. It is used as a backing plate for furnace elements during heat treatment of chutes, baskets. Mill-products are represented with further types: rods, welded, seamless tube, wire, plate, sheet, flange, connecting piece, forging.

Properties of Inconel sheet

• It is resistant to acid, alkaline aggressive environment.

• It is substantially insusceptible to chloride ions and to corrosion cracking.

• Inconel has good mechanical properties.

• It has a high lasting-quality in a wide temperature range.

Inconel sheet is utilized in:

• chemical industry;

• aerospace industry;

• nuclear technologies;

• components of a gas turbine;

• heat treatment industry;

• paper-and-pulp industry;

• processing of foodstuffs;

Flat products of Inconel 600 have a thickness 0.5 — 4 mm. It is possible to make customized sheet, strip with additional sizes.

Processing

This alloy has a high plasticity and it can satisfactory be taken to molding. But it is disposed to a hammer hardening and that is why it must be cut at small speeds with a special tool. A welding is possible only after previous heating details to 100−120°C with further annealing.

Welding:

Type Description
limitedly weldable welding is possible at heating to 100−120°С and last heat treating
hardly weldable in order to obtain a qualitative welded joints, it is necessary to perform the following operations: while welding to heat it up to 200−300°C, heat treating (annealing) after welding
weldable
without stint
welding is done without further heat treating or previous heating

Inconel 600, 601 sheet, strip supplier

«Auremo» company proposes to buy Inconel 600, 601 sheet, strip on the most favorable terms. There is a wide range of goods of a high quality in stock. If you buy products by wholesale, you will be given special discounts. Inconel 600, 601 sheet, strip price depends on order quantity and additional conditions of supply. An availability of products and efficiency of delivery are conditioned by a fact that we have offices in Moscow, St. Petersburg and cities of Central Europe.

Chemical composition of alloy:

Ni C Si S P Cr Cu Mo Mn Co Ti Cb+Ta Fe Al
The basis is no less than 72,0 0.15 0.5 0.015
14−17 0.5
1.0


6,0−10.0

Sheet has a thickness 0.5 — 4 mm. Rod is made in a form of forging with a diameter of not more than 230 mm. The bigger sizes can be made to order. A coiled material is made in large-format sizes. Its widths can constitute up to 610 mm; plate widths is up to 75 mm. Seamless pipe can be rolled to a diameter of not more than 200 mm. Huge diameters can be made to order in a form of welded tube. All products (with a welding seam) are exposed to a method with tight tolerances of nondestructive control. Practically, tubes can be manufactured of any diameter and an extent of allowance does not depend on a size of order.

Buy Inconel at a bargain price

«Auremo» company offers to buy Inconel 600, 601 sheet, strip. Here you will find the best price from Inconel 600, 601 sheet, strip supplier. It is conditioned by technological peculiarities without including additional expenses. A wide range of goods for scaled-up fabrications is in stock. We also have attractive terms for retail customers. On company’s web-site, you can find a price-list, a catalog of production and all information about it. Inconel 600, 601 sheet, strip price depends on order quantity and additional conditions of supply. You can easily find us through the Internet. «Auremo» company is a profitable Inconel 600, 601 sheet, strip supplier. Buy Inconel 600, 601 sheet, strip in a moment! There is an affordable Inconel 600, 601 sheet, strip price from a supplier. We are waiting for your orders.