By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Wire, rod made of titanium grade 6 (Ti5Al2.5Sn)

General characteristics

Alloy Ti5Al2.5Sn is one of first native industrial titanium alloys. It was manufactured by VIAM in 1950-ies. There is casting variant of this alloy. Titanium grade 6 is proposed by VIAM in 1958. It had become an analogue of foreign grade Ti-5Al-22,5Sn. This alloy has a single-phase α-structure. It is not hardened by a heat treatment.

Percentage composition of titanium grade 6 according to GOST 19 807 — 91

C N H Si Fe Zr O Sn Ti Al V Others
0.1 0.05 0.015 0.12 0.3 0.3 0.15 2 — 3 88.833 — 93.4 4.3 — 6 1.2 up to 0,3%

Titanium grade 6 has a low content of residual elements. It is intended for operational use in conditions of cryogenic temperatures. It is used in pumps intended to supply liquid hydrogen.

Advantages of grades

Alloy t° of melting Volume weight Manufacturing process Properties Application
~Titanium grade 6 980−1030°

4.41

g/cm³

Low technological plasticity during a pressure treatment

Alloy is welded by any types of welding. Perfect casting properties.

Low technological plasticity and moderate strength. Aluminium increases heat-resistance and strength. However, it decreases workability. Constructions and details that durably work at a temperature of 350−400°.
Titanium grade 6 950−990°

4.42

g/cm³

During casting of ingots, you may experience some difficulties because of stannum entering. Stannum and aluminium improve workable and strength properties. Stannum facilitates alloy pressure treatment. Constructions and details of aircraft techniques, which durably work at a temperature of 400−450°

Application

Cryogenic and corrosive resistance, heat resistance, plasticity, good weldability, low sensitivity to cuts allow using pipes of grade VT in shipbuilding, mechanical engineering, rocket engineering, aviation, chemical and cryogenic manufacture.

Physical characteristics

Description Identification
Temperature at which are obtained actual characteristics: 20°С
Heat conduction coefficient t° 200 °C [1/ °С] 10.47
Density g/cm3;

4.41
Elasticity module of 1 sort Е [MPa] x 10-5 1.05
Specific heat of the material [J/(kg/deg)] (range of temperature 20°С) 0.586
Short-term strength limit sv [MPa], Annealed bar GOST 26 492−85 685−735
Specific electric resistance Оmh-mm2/m 1.08

Titanium grade 6 supplier

Where to buy a rod, a wire, a bar of titanium grade 6 (Ti5Al2.5Sn) by wholesale? «Auremo» company proposes to buy Ti5Al2.5Sn wire, rod on favourable terms. A wide range of half-finished goods is in stock. They are compliant with GOST and International Standards of quality. Rod, wire, bar of Ti5Al2.5Sn are always in stock. You can buy them for an affordable price in Ti5Al2.5Sn wire, rod supplier. Buy it right now! Titanium grade 6 price is privileged for wholesale customers. Buy Ti5Al2.5Sn wire, rod right now.

Buy at a bargain price

«Auremo» company proposes to buy titanium mill-products on favourable terms. A wide range of goods for scaled-up fabrications is presented in stock. Wire, rod, bar of titanium grade 6 are always in stock. Ti5Al2.5Sn wire, rod price is conditioned by technological details of production without including additional expenses. You can find a price-list, a catalog of production and all information about it on company’s web-site. Titanium grade 6 price depends on order quantity and additional conditions of supply. Buy titanium grade 6 in a moment. You can easily find us through the Internet. «Auremo» supplier offers to buy goods by wholesale. «Auremo» company is a profitable Ti5Al2.5Sn wire, rod supplier in this segment of metal-roll. Buy goods right now in titanium grade 6 supplier. A quality is compliant with GOST (all-Union State Standards) and International Standards. There is the best Ti5Al2.5Sn wire, rod price from a supplier. Buy titanium grade 6 for reasonable titanium casting price. We are waiting for your orders.