By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Rpd, wire, tube, sheet, strip MNZH5-1

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
Мнж5-1 Delivery from the stock, in stock

Technical characteristics

CuNi5Fe1 is a copper-nickel European alloy that relates to bronze mill-products. Alloy is characterized by good deformability in cold condition. Manufacture is specified by GOST 492 2006. Semi-fabricates that can be made of CuNi5Fe1 alloy: pipe, sheet, wire, rod. CuNi5Fe1 sheet can have a thickness of 0,1−25 mm. Rod can have a diameter of 3−400 mm. Wire can have a cross-section of 1.0 — 2 mm.

Percentage composition of copper-nickel alloy CuNi5Fe1: Ni+Co (5−6.5%), Fe (1−1.4%), C (up to 0.03%), Si (up to 0.1%), Mn (0.3−0.8%), S (0.01%), P (up to 0,4%), Cu (90.6−93.7%), As (0.1%), Pb (up to 0.0065%), Zn (up to 0.5%), Sb (up to 0.005%), Bi (up to 0.002%), Sn (up to 0.1%), residual elements (0.7%). Alloy is characterized by good heat and electrical conductivity. Copper constitutes a basis of alloy because it has better conductivity than aluminium and silver. It has six times more of conductivity than ferrum and platinum.

Physical characteristics of the alloy

1) Melting point of material is 1120 °C;

2) Temperature of heat treatment is 900 — 1000 °C.

3) Temperature of casting is 600−650°C,

Mechanical properties of alloy CuNi5Fe1 at a temperature of 20°C

Mill-products

σв(MPa)

δ5 (%)

Soft alloy 220−260 50−60
Hard alloy 400−500 5−10

Application

Different parts of electrical equipment are manufactured of CuNi5Fe1 steel. They are also used for a manufacture of electrodes for welding copper alloys around each other or with brass; for welding with aluminium-manganese bronze. Manufacture of CuNi5Fe1 pipe is specified by GOST 492−2006. Such pipes are used in shipbuilding industry, for manufacture of condensers and heat exchangers of steam turbines.

CuNi5Fe1 rod, pipe, sheet supplier

«Auremo» company offers to buy copper-nickel alloys for a reasonable price. CuNi5Fe1 rod, pipe, sheet price forms according to international cost of metal-roll without including other expenses. If you buy CuNi5Fe1 rod, pipe, sheet by wholesale, you will be given special discounts. Supplies are delivered directly from stock. It gives a vivid choice of products for customers and significant saving in storages and premises. Availability of products and efficiency of delivery are conditioned by the fact that we have our offices in Moscow, St. Petersburg and cities of Central Europe. We invite you to a partnership. Buy CuNi5Fe1 rod, pipe, sheet in a moment.

Buy at a bargain price

Huge range of copper-nickel mill-products is presented in stock of «Auremo» CuNi5Fe1 rod, pipe, sheet supplier. All products are certificated. Quality is guaranteed by rigorous technology compliance of a manufacture. You can easily buy goods for a reasonable CuNi5Fe1 rod, pipe, sheet price. Just connect us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are noted in section «Contacts». Order a service «Call-back». Our managers are always ready to lend a knowledgeable assistance. If a required type of product is absent, we can manufacture it in the off-standard sizes by individual order.