By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Titanium grade 2

Advantages

Titanium grade 2 is a grade of a high-frequency. It is very soft and heat-resisting metal with a melting point of 1668 °C. It differs with minimal coefficient of thermal expansion, low density (4,505 g/cm3), excellent plasticity (20−80%) that allows stamping various details. Due to presence of oxide surface film, it has a unique corrosive resistance that exceeds a resistance of stainless steels. Titanium sheet that has the same thickness as writing paper dissolves in a sea water over a period of 4000 years.

Titanium gost VT3−1 alloyed with molybdenum (2−3%), aluminium (5.5−7%), zirconium (0.5%) differs with softness, plasticity, corrosive and chemical resistance, high heat-resistance, insignificant coefficient of thermal expansion. Fatigue resistance essentially depends on outdoor environment. Titanium alloys demonstrate higher enduring quality than in air environment in vacuum.

Percentage composition of titanium grade 2 according to GOST 19807 — 91

Fe C Si N Ti O H Residual elements
≤0,25 ≤0,07 ≤0,1 ≤0,04 99.3 — 99.7 ≤ 0,2 ≤0,01 ≤ 0,3

Application

Heat-resistance, corrosive resistance, softness, high plasticity of this metal make it an ideal material for manufacturing tubes, die cast and pressed parts in aircraft and rocket engineering (45−48%). It is also used in chemical industry, shipbuilding, energetics (up to 20%). A consumption expansion of this metal is the most demonstrative in aviation.

Surface condition and quality exert a great influence on damping enduring quality of titanium semi-fabricates. By surface quality, there are meant its roughness, macro- or micromechanical irregularity; by surface condition, there are meant its texture, physical-mechanical properties of skins, which depend on schedule of mechanical treatment. Gentle finishing mechanical treatment with metal removing (up to 0.1 mm) and further hand polishing to 8−9 grade of roughness with a help of copper coated abrasives exert the lowest influence on fatigue range. The worst fatigue resistance can be observed after abrasive grinding and forced cutting.

Supplier

«Auremo» supplier offers to buy titanium grade 2 by wholesale. There is a wide range of products in stock. Here you will find an affordable price from titanium grade 2 supplier. Buy products in a moment! Titanium grade 2 price is privileged for wholesale customers.

Buy at a bargain price

«Auremo» company is a supplier of titanium to countries of Eastern and Central Europe. An experience of our company allows you easily buy titanium grade 2. A wide selection of products is presented in stock. A price depends on order quantity and additional conditions of supply. Titanium grade 2 price is privileged for wholesale customers. We are working with experienced managers who can help to buy products by wholesale. A large assortment will not leave you without a choice. We have the best price-quality ratio. We invite you to a partnership. Buy titanium right now! There is the best price from titanium grade 2 supplier.

Our consultant will save your time

+7 (962) 383-76-36
E-mail:

Subscription

Special offers and discounts. :)