By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Tube, plate made of Ti-10V-2Fe-3Al

Equivalent

Grade analogue W. Nr. Aisi Uns En Order
R56410 Ti-10V-2Fe-3Al Buy from stock, view availability

General characteristics

Titanium alloy Ti-10V-2Fe-3Al or Ti 10−2-3 relates to pseudo-β-alloys. It is manufactured as a high-strength workable alloy. It is intended to work at t ° up to 315 °C. This titanium alloy has exceptional resistance to corrosion cracking in salt water and impact hardness in air or sea water. Alloy is characterized by high hardenability (in sections of up to 125 mm), significant effect of thermal hardening (δv from 1100 to 1240 MPa). Temperature of thermohardening must not be lower than 1540 °C. Available mill-products: pipe, flat products, bars, strips, forgings.

Percentage composition according to ASTM standard

Ti V Al Fe O C N H Y Residual elements
Basis 9−11 2,6−3,4 2.3−2.6 ≤ 0,13 ≤ 0,5 ≤ 0,5 ≤ 0,15 ≤ 0,05 ≤ 0,03

European titanium alloy Ti 10−2-3 possesses better workability than most titanium alloys during hot working pressure. It is easily subjected to isothermal stamping. It has low susceptibility to crack initiation during metal forging.

Corrosive resistance

One of the outstanding properties of titanium Ti 10−2-3 is exceptional corrosion resistance in sea water. Corrosion resistance is evaluated by a magnitude of mass loss in milligrams sq cm of a surface during 12 weeks of testing in a quiescent phase and in a jet.

Material

Losses mg/cm2

in a quiescent phase in the jet
Titanium Ti 10−2-3 0.0 0.0
Steel Cr18Ni9Ti 0.0 0.9
Alluminium AlMn61 0.6 12.7
Brass BrSn70−1 4.1 20.1
Bronze CuSn1Zn2 3.4 25
Electrolytic copper 4.3 69

Welding

Oxygen or nitrogen hungry metal requires inert gas protection not only on a weld zone, but on a reverse side of a seam, and all those zones of metal that are heated to 400 degrees as well. The most common method of welding is automatic or hand arc melting welding under argon protection.

Application

Ti 10−2-3 is used in shipbuilding, construction of an airframe: pylons, doors, hinges, axles, chassis parts, bearings, helicopter components, cars

Supplier

«Auremo» Ti-10V-2Fe-3Al tube, plate supplier proposes to buy goods for the most favorable price. A wide choice of qualitative products that complies with GOST and International Standards of quality is presented in stock. Availability of products and efficiency of delivery are conditioned by a fact that our offices are located in Moscow, St. Petersburg and cities of Central Europe. You can easily buy goods in Ti-10V-2Fe-3Al tube, plate supplier. Ti-10V-2Fe-3Al tube, plate price depends on order quantity and additional conditions of supply. If you buy Ti-10V-2Fe-3Al tube, plate by wholesale, you will be given special discounts.

Buy at a bargain price

All products are certificated. A quality is guaranteed by rigorous technology compliance of a manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. You can easily buy Ti-10V-2Fe-3Al tube, plate by connecting us with a convenient way for you. Phone numbers, e-mail addresses of the closest company’s offices are noted in section «Contacts». Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements. Ti-10V-2Fe-3Al tube, sheet, plate are always in stock. We offer the best Ti-10V-2Fe-3Al tube, plate price in this segment of mill-products. Quality complies with International Standards.