By visiting this site, you accept the use of cookies. More about our cookie policy.
Will call in 30 seconds. Free.

Carbide tips

Technical characteristics

Carbide tips are applied in the capacity of cutting tips at metal tooling. Such products can be divided into two types: brazing and insert. An advantage of the last lies in the fact that there is possible to perform a few of different processes in tandem on one machine with their help. There are used such refractory metals at manufacture of carbide tips (HG20, A10, B35, WK10):

— tungsten;

— titanium;

— cobalt;

— tantalum.

B25

Brazing carbide tips of this grade are made out of tungsten according to GOST. It gives a possibility to use tips at fast cutting speeds at a temperature of up to 1000 °C. You can also buy carbide tips B35 for similar goals — they are almost identical to B25 by heat resistance. But they possess higher ultimate bending strength.

WK10

Carbide tips WK10 with hardness HRA (not less than 87.0) are a good value for using it in the capacity of drill tool, cutting bit or milling tool. Ultimate bending strength is even higher than in B25 and B35. It constitutes not less than 180 kgf/mm2.

Alloying

Metal carbide is often added to tungsten alloys. Due to this, product brittleness decreases. It means that its operational life increases. Except for tungsten carbides (B25, B35, WK10), there are distinguished carbide tips in which are added such rare metal alloys as titanium (H10), titanium + tantalum carbide (T50) and tungstenless.

Supplier

«Auremo» carbide tips supplier successfully sells carbide tips (B25, B35, WK10, H10, T50) on favorable terms. A wide range of high-quality goods is presented in stock. Carbide tips price depends on order quantity and additional conditions of supply. If you buy carbide tips, you will be given special discounts. Our offices located in Moscow, St. Petersburg and cities of Central Europe provide availability of products and efficiency of delivery. We invite you to a partnership.

Buy at a bargain price

«Auremo» carbide tips supplier sells rare and refractory metals. All products are certificated. Quality is guaranteed by rigorous technology compliance of a manufacture. Our managers are always ready to answer any questions and to give a knowledgeable assistance. A large assortment will not leave you without a choice. You can buy goods by connecting the nearest office. Phone numbers, e-mail addresses of the closest company’s offices are noted in section «Contacts». We offer the best carbide tips price from supplier. Order a service «Call-back» and our manager will help you to choose products that will fit your individual requirements.